null X1100 Four Door Controller and Power Kit

No reviews yet Write a Review


Overview’s Smarter Access Control is a powerful, easy-to-use solution for commercial properties that seamlessly integrates with the for Business platform. This platform enables intelligent automation and features, such as disarming when badging in, locking doors when arming, and tagging access events on the video timeline.

The X1100 Four Door Controller and Power Kit comes with an X1100 Door Controller and an X100 Two Reader Expansion Module pre-wired to a 12/24 VDC dual-voltage power supply. Installation is easy with this self-contained kit that can provide power for a complete 3- or 4-door access control system.


  • Four reader inputs
  • Eight relay outputs
  • Eight programmable inputs
  • Pre-assembled to fully power a 3- or 4-door system


  • Scan-to-add card format and serial detection
  • Control doors and manage users from the app
  • User-friendly, flexible scheduling
  • Configure hardware using web or app for easy installation
  • Plug & play installation — no networking expertise required

Power supply specifications - Download the datasheet here

Input Voltage

120 / 208 / 230V AC 50/60 Hz

Main Outputs

2A @ 12 VDC

2A @ 24 VDC

Auxiliary Output

1.5 A Class II power limited

F8P Distributed Outputs

2 A Class II power limited

Battery Charge Current

0.7 or 1.60A Selectable

System BTU/Hour

34 @ 12V, 41 @ 24V


85% 120V AC 60 Hz In, Full Load


UL294, UL603, UL1076

ULC S318, S319, CSA C22.2#107.1

CSA 22.2 #60950

RoHS Lead free

CE Approved

Operating Temperature

-4°F - 122°F (-20°C - 50°C)

Door Controller specifications

Important: The interface is for use in low-voltage, Class 2 circuits only. The installation of this device must comply with all local fire and electrical codes.

Input Power

12 to 24 VDC ±10%, 1.9 A max


Shielded 2-Wire RS-485


Two dedicated reader inputs

Four programmable inputs

One dedicated input for each of the following: Tamper, AC Fail, and Battery Fail


Four relay outputs 5 A (NO) and 3 A (NC) @ 30 VDC

Two-wire LED control

Single-wire buzzer output


FCC, CE, UL 294 Certified

Dimensions (W x L x H)

6.46" x 5.51" x 1.02” (16.4 cm x 14 cm x 2.6 cm)


32°F - 158°F (0°C - 70°C) operational

-67°F - 185°F (-55 - 85°C) storage

Operating Humidity

5-85% (non-condensing) RH



Kit specifications


20" x 16" x 4.5" (50.8 cm x 40.64 cm x 11.43 cm)


20 lbs. (9.1 kg)

Extra Information