No reviews yet Write a Review


The AFC-50 is an analog/addressable fire alarm system with a total system capacity of 50 addresses. Additional capacity on the system is achieved using multi-point SLC modules. The control panel utilizes the exclusive
Potter protocol that includes a complete line of sensors and modules. Each SLC may be comprised of any combination of smoke sensor, heat detectors or modules and allows for a total of 50 ohms of impedance and
may use any wire compliant with the National Electrical Code (NEC). The AFC-50 has a 5 Amp power supply with two Notification Appliance Circuits (NACs) and two Input/Output (I/O) circuits. The NACs are rated at 3 Amps each and the I/Os are rated at 1 Amp each. Each output is regulated and power limited. In addition, each output is uniquely programmable andmay be configured for steady signal, strobe synchronization, constant
power, door holder power, or releasing. The strobe synchronization includes Gentex, AMSECO, System Sensor and Cooper/Wheelock and with the exclusive Quadrasync each output may have a unique brand and all strobes will flash together. The NACs may be expanded using the PSN-1000 series intelligent power supplies. Each PSN-1000 adds another 10 Amps of power, 2 additional input circuits and the AFC-50 will support up to 31 power supplies. The system will synchronize the strobes system wide. In addition, the PSN-1000E has space to allow the installation of up to six expansion cards. The cards mount on a stacker bracket that allows access to all circuit connections.

• 50 addresses available on this analog addressable system
• Additional system capacity achieved via multi-point SLC modules
• 99 software zones
• NFPA 72 Compliant Smoke Sensitivity Test Built-In
• System Operates as Class A or Class B for SLC, P-Link and NACs
• 5 Amp Power Supply, Expandable to 310 amps
• 2 NACS, Regulated, Rated at 3 Amps each, expandable to 188
• 2 Input/Output (I/O) Circuits for system flexibility rated at 1 Ampeach
• Strobe Synchronization and System Wide Sync for Gentex®, AMSECO®, Cooper Wheelock® and System Sensor® strobes
• Dedicated Alarm, Supervisory and Trouble Relays
• 4,000 Event History Buffer
• Optional two line DACT with UD-2000 that can report General, Zone or Point Information
• Built in IP Communicator
• Ethernet Port for Programming and Network Connectivity
• E-Mail System Status, Reports and Event Information
• Product includes 5 year warranty.

Dimensions 16”W x 17”H x 3 7/8”D

AC Mains
3.0 Amps @ 120 VAC 50/60 HZ
2.0 Amps @ 240 VAC 50/60 HZ
Enclosure 16 gauge cold rolled steel with removable locked door with Lexan viewing window

Standby Current-130 mA
Alarm Current-200 mA
• 5 Amps power for NACs, I/O, and P-Link
• 3 Amps per NAC, regulated
• 1 Amp per I/O circuit, regulated
• Battery Charger range 8-55 Ah
• Battery Charger voltage 27.3 VDC
• P-Link maximum current of 1 Amp

Temperature and
Humidity Range
32° to 120° (0°C to 49°C) with a maximum
humidity of 93% non-condensing.

Extra Information