You save

Alarm.com | Pro Series CSVR, 16-Channel NDAA-Compliant Video Recorder with 8 PoE Ports & 12TB Storage | ADC-CSVR2008P-1X12TB

No reviews yet Write a Review
SKU:
ADC-CSVR2008P-1X12TB

Continuous local recording for up to 16 cameras, managed from the same Alarm.com account the dealer already uses for intrusion and the rest of the video. Footage lives on site on the recorder's own drives, while search, playback and clip sharing happen through Alarm.com, so the customer gets local retention without a VMS server or a client application on somebody's desktop.

Built for the commercial installer

Eight PoE ports power and carry eight cameras straight off the back of the unit. It still records up to 16 cameras: add an unmanaged switch for the extra ones, either downstream off the camera port or upstream at the router. That makes this the right pick when the count sits above eight but the budget does not justify sixteen ports.

It ships with 12 TB installed across 1 of the 2 bays, with the platform supporting 32 tb (2x 3.5 in hdd, sata 6 gb/s, 16 tb per bay). The recorder handles Alarm.com and third-party cameras at the same time on a supported topology, which matters on a retrofit where the existing cameras stay and only some are replaced. Local display gives live and recorded playback plus clip and archive export at the unit, so pulling footage for an incident does not require a laptop or a site visit from the dealer.

NDAA Section 889 compliant and not produced by any entity on the FCC Covered List, which keeps it eligible for federal, state and education contracts where that language appears in the spec. Rack ears and a Cat5e cable are in the box.

Key features

  • Records up to 16 cameras continuously with retention on site rather than metered cloud storage
  • NDAA Section 889 compliant, so it clears procurement language that disqualifies most low-cost recorders
  • No VMS server and no client software, managed from the Alarm.com account alongside intrusion and video
  • Records Alarm.com and third-party cameras together, which keeps existing hardware in play on a retrofit
  • Clip and archive export at the unit, so incident footage can be pulled on site
  • Rack ears and Cat5e cable included for a clean rack install out of the box

System requirements

Requires an Ethernet connection to broadband and an Alarm.com customer account with a service package that supports the Pro Series CSVR. A USB keyboard and mouse are optional for local display use. The CSVR records 24/7 and cannot be scheduled to record only during set time frames.

Brand:
Alarm.com
Form factor:
Rack-mountable commercial stream video recorder
Recording channels:
Up to 16 cameras
PoE ports:
8 RJ45 PoE ports
Storage installed:
12 TB installed (1 x 12 TB), 1 drive of 2 bays populated
Maximum storage:
Up to 32 TB (2x 3.5 in HDD, SATA 6 Gb/s, 16 TB per bay)
Drive bays:
2
Video output:
2x HDMI (up to 3840 x 2160)
Local display:
Live and recorded video playback, clip export, archive export
Network ports:
Client RJ45 port and Camera RJ45 port
Power input:
Power cord with rear power switch
Dimensions:
14.4 x 12.5 x 1.9 in (36.6 x 31.6 x 4.8 cm)
Operating temp:
32F to 104F (0C to 40C)
Compliance:
NDAA Section 889 compliant, not produced by any entity on the FCC Covered List
Compatibility:
Alarm.com and supported third-party cameras on a supported network topology
Included accessories:
Rack mount ears and screws, Cat5e Ethernet cable
Can this record 16 cameras with only 8 PoE ports?
Yes. Alarm.com confirms the 8-port CSVR supports up to 16 cameras. Connect an unmanaged switch for the extra cameras, either downstream from the camera port or upstream at the router.
Is this recorder NDAA compliant?
Yes. Alarm.com states the Pro Series CSVR is compliant with Section 889 of the NDAA and is not produced by any entity identified on the FCC Covered List.
Can it record third-party cameras as well as Alarm.com cameras?
Yes. Any Pro Series CSVR can record Alarm.com and third-party cameras simultaneously, provided a supported network topology is used. See the installation guide for the supported diagrams.
Can recording be scheduled for certain hours only?
No. The Pro Series CSVR cannot be scheduled to record only during specific time frames. The 20XXP and 21XXP series are built for continuous 24/7 local recording.
Can a video doorbell be associated with this recorder?
Only the Alarm.com PoE Video Door Station (ADC-VDB755P) can be associated to an Alarm.com SVR or CSVR. Other doorbell cameras cannot.
Does this need a separate VMS server or client software?
No. It is managed from the Alarm.com customer account and app. There is no on-site video management server to spec and no client application to install and maintain.

Installation Guide

Model Comparison