null

Qolsys | IQ S-Line Hardwire 16 (Encrypted) - Translates 16 Hardwire Zones to 16 Qolsys Wireless | QS7133-840

No reviews yet Write a Review
SKU:
QO-QS7133-840
IQ S-Line Hardwire 16 (Encrypted) - Translates 16 Hardwire Zones to 16 Qolsys Wireless

Description

***For use with Qolsys 319.5 Panel Version only***

The IQ Hardwire 16-F offers a cost effective way of integrating hardwired security & smoke detector zones with the IQ Panel 2/2+. It includes backup battery charging, 500mA of 12volt auxiliary power, an onboard siren relay, built-in status LED’s for each zone and support for up to 10 two-wire smoke detectors. Normally Open and Normally Closed contacts are supported as well as powered zones like motion sensors and glass break detectors.

 

FEATURES

- Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
- Supports up to ten two wire smoke detectors
- LED lighted zones for ease of “learn-in” installation/troubleshooting
- EOL supervision using 4.7K Ohm resistors (included)
- Up to 500 Milliamps of power for hardwired motion detectors, glass break detector, and/or sirens
- Charging circuit for back-up battery, fully supervised with power outage recovery

SPECIFICATIONS

- Input Voltage: 16.0VDC Plug-In Transformer Backup Battery: 12VDC 5AH Max (optional) Dimensions: 5.5” X 3.5”
- Operating Temperature: 32 to 122F (0 to 50C)
- Humidity: 95% RH Max
- EOL Supervision: 4.7K Ohm
- Input Zones: 15 N/O or N/C
- Smoke Zone: 1 two-wire smoke loop, 10 detectors max. Support for System Sensor® 2W-B, 2WT-B*
- Auxiliary Voltage Output: 12VDC @ 500mA Max
- Tamper Zone: Used for case tamper, no resistor
- Relay Contact: 60VDC/1A Max drives siren

Extra Information

Brand:
Qolsys
Input Voltage:
16.0 VDC Plug-In Transformer
Backup Battery:
12 VDC, 5 AH Max (optional)
Dimensions:
5.5” x 3.5”
Operating Temperature:
32°F to 122°F (0°C to 50°C)
Humidity:
95% RH Max
Auxiliary Voltage Output:
12 VDC @ 500 mA Max
Tamper Zone:
Used for case tamper, no resistor required
Relay Contact:
60 VDC / 1 A Max (for siren drive)

Related Products