R-Series Three-Gang Remote Annunciator Wall Plate, White
Kidde Commercial

R-Series Three-Gang Remote Annunciator Wall Plate, White

SKU KD-FSAT3

New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

The Kidde FSAT3 gives installers a clean, flush-mount option for R-Series remote annunciator hardware. This three-gang white wall plate accepts annunciator modules and zone expanders at secondary monitoring locations - lobby desks, fire command rooms, mechanical spaces - so building personnel and responding crews can read system status without walking to the main FACP.

Built for the commercial fire alarm installer

Three-gang configuration supports up to three R-Series module positions, matching the capacity of the RA-ENC3 steel enclosure but in a standard wall plate form factor. Mounts directly to North American 4-inch square electrical boxes for a flush finish. Compatible with all Kidde Commercial EVOLVE and FX Series intelligent fire alarm control panels. UL, ULC, and FM listed for code-compliant installations across the US and Canada.

Key features

  • Three-gang wall plate: accepts R-Series LCD annunciators (K-RLCD), LED zone annunciators (K-RLED-C), and 24-zone LED expanders (K-RLED24)
  • System status LEDs: Power, Alarm, Supervisory, Trouble, and Ground Fault indicators visible at a glance
  • Standard electrical box mounting for flush wall installation - no proprietary hardware
  • White finish blends with standard building trim and wall plates
  • UL, ULC, and FM listed for commercial fire alarm applications

System requirements

R-Series annunciator modules communicate with the FACP over the RS-485 data riser in Class A or Class B wiring configurations. Power is supplied by the FACP or an approved 24 VDC power supply. Maximum wire run is 4,000 ft (1,219 m) using 18 to 14 AWG twisted pair.

Specifications

SKUKD-FSAT3
BrandKidde Commercial
Form factorThree-gang wall plate, white
CompatibilityKidde Commercial R-Series annunciators (K-RLCD, K-RLED-C, K-RLED24)
Panel compatibilityEVOLVE, FX Series (FX64, FX1000), VS1, VS4
MountingNorth American 4-inch square electrical box
CommunicationRS-485 data riser (Class A or Class B)
Power input24 VDC from FACP or approved power supply
Data wiring18 to 14 AWG twisted pair, 6 twists/ft minimum, 4,000 ft max run
Status indicatorsPower, Alarm, Supervisory, Trouble, Ground Fault LEDs
Operating temp32 to 120°F (0 to 49°C)
Operating humidity0 to 93% RH, noncondensing at 90°F (32°C)
ComplianceUL (S3424), ULC, FM Approved

Documents and resources

FAQs

What annunciator modules fit this wall plate?
The FSAT3 three-gang plate accepts R-Series LCD annunciators (K-RLCD-2, K-RLCD-C-2), LED zone annunciators (K-RLED-C-2), and 24-zone LED expanders (K-RLED24-2). Up to three module positions.
Which Kidde fire panels does this work with?
Compatible with Kidde Commercial EVOLVE, FX Series (FX64, FX1000), VS1, and VS4 intelligent fire alarm control panels. Annunciator modules communicate with the panel over the RS-485 data riser.
How is this different from the RA-ENC enclosures?
Flush-mount wall plate for standard 4-inch boxes. RA-ENC enclosures are surface-mount welded steel with hinged covers and key locks. Use this plate for flush installs; RA-ENC when a locking cover is required.
What wiring do I need to run to this location?
RS-485 twisted pair, 18-14 AWG, 6 twists/ft minimum. Max run 4,000 ft. Class A or Class B supported. Power from FACP or approved 24 VDC supply.
All Kidde Commercial