You save

Luminys | N9 Specialty Series 12MP Fisheye 1.85mm, IR LEDs | N9F-12RA1

Luminys | N9 Specialty Series 12MP Fisheye 1.85mm, IR LEDs | N9F-12RA1

No reviews yet Write a Review
SKU:
LM-N9F-12RA1

One wide shot, no blind spots. The Luminys N9F-12RA1 delivers 12MP fisheye coverage from a single ceiling-mounted dome -- giving installers full 360° situational awareness without running cable to four corner cameras. NDAA compliant and ONVIF Profile S/G/T certified, it streams to LumiViewer or any compatible NVR/VMS without drama.

Built for the commercial installer

The N9F-12RA1 runs on PoE+ or 12 VDC from a single Cat5e/6 run. Flush-mounts to a ceiling gang box via the LUM-J03 junction box, or adapts to pendant and wall configurations with optional Luminys accessories. IP67 weather rating and IK10 impact resistance handle loading docks, parking structures, and exposed lobbies. Three IR LEDs push 33 feet of low-light coverage. Metal housing, 0.79 kg net.

Key features

  • 12MP 360° fisheye: single sensor replaces a four-camera corner array in many commercial applications -- one cable run, one license, full room
  • LumiAnalytics on board: people counting, queue management with reporting, and heat mapping run on the camera itself -- no separate analytics server
  • Two-way audio: built-in dual microphone and speaker for on-camera intercom or event audio capture without add-on hardware
  • PoE+ powered: single cable run for power and data, <13.9W draw, standard 802.3at switch compatible
  • IP67 / IK10: fully weatherproof and vandal-resistant for exposed interior and semi-exterior installs
  • NDAA compliant: cleared for government facilities and compliance-sensitive commercial deployments
  • ONVIF Profile S/G/T: integrates alongside cameras from other manufacturers in any ONVIF-compatible VMS or NVR

Analytics and viewing modes

On-camera video analytics include line crossing and intrusion detection standard. LumiAnalytics adds people counting (tripwire and in-area), queue management with exportable reports, and heat mapping -- operational data for retail, hospitality, and transportation sites. Fisheye dewarping modes cover panorama (1P, 2P), region (1R, 2R, 4R), and combo (1O+3R) for flexible display in LumiViewer or a compatible VMS.

System requirements

Connects via RJ-45 PoE+ (802.3at) or 12 VDC. Streams to LumiViewer desktop and mobile, any ONVIF NVR/VMS, or directly to FTP, SFTP, or NAS. Local MicroSD storage up to 256 GB. Alarm I/O: 2 inputs and 2 outputs for relay and access control panel integration.

Brand:
Luminys
Form factor:
Fisheye dome, metal housing
Image sensor:
1/1.7-in. 12MP Progressive CMOS
Resolution:
Up to 4000 x 3000 (12MP)
Lens:
Fixed, 1.85mm, F2.0
Field of view:
H: 185° / V: 180°
IR range:
10 m (33 ft), 3 IR LEDs
Power input:
12 VDC or PoE+ (802.3at), < 13.9W
Audio:
Two-way; built-in dual mic and speaker, 1-ch RCA line in/out
Alarm I/O:
2 inputs / 2 outputs
Compression:
H.265+, H.265, H.264+, H.264, MJPEG
Streams:
3 simultaneous streams
Frame rate:
Up to 25 fps at 12MP (4000 x 3000)
Day/Night:
Auto ICR, DWDR, 3D NR
Analytics:
Line Crossing, Intrusion, People Counting, Queue Management, Heat Map
Communication:
RJ-45, ONVIF Profile S/G/T, RTSP
Storage:
MicroSD up to 256 GB, FTP, SFTP, NAS
Operating temp:
-40°F to 140°F (-40°C to 60°C)
Operating humidity:
0 to 95% RH, non-condensing
Weather rating:
IP67, IK10
Dimensions:
2.35 in. x Ø5.90 in. (59.8 mm x Ø149.8 mm)
Net weight:
0.79 kg (1.74 lb)
Compliance:
NDAA, FCC, IC
Does the N9F-12RA1 work with my existing NVR or VMS?
Yes. The N9F-12RA1 supports ONVIF Profile S, G, and T, so it integrates with any ONVIF-compatible NVR or VMS. It also streams via RTSP for custom integrations and works with LumiViewer desktop and mobile.
What power options does this camera support?
PoE+ (802.3at) or 12 VDC. Total draw is under 13.9W. A single Cat5e/6 run covers both power and data with a standard PoE+ switch.
Is the N9F-12RA1 NDAA compliant?
Yes. It is NDAA Section 889 compliant and FCC and IC certified -- cleared for government facilities and compliance-sensitive commercial deployments.
Does the fisheye dewarping require a separate server or license?
No. Dewarping modes (panoramic, region, combo) run in the camera, accessible via LumiViewer or any ONVIF VMS. LumiAnalytics -- people counting, queue management, and heat mapping -- also runs on-camera with no external server.
What mounting accessories are required?
For flush ceiling install, pair with the LUM-J03 junction box. Pendant mount needs the LUM-A03 adapter plate and LUM-E02 ceiling bracket. Wall mount needs LUM-A03 and LUM-W06. See the spec sheet for the full accessory matrix.
What local storage does it support?
MicroSD cards up to 256 GB (card not included). Also supports FTP, SFTP, and NAS for network-based recording.

Spec Sheet

Download File

Related Products