• SS&Si
  • Video Surveillance
  • Luminys | N9 4MP License Plate Recognition Camera, 10-50mm Motorized Vari-Focal, IR LEDs | N9L-4RAL

You save

Luminys | N9 4MP License Plate Recognition Camera, 10-50mm Motorized Vari-Focal, IR LEDs | N9L-4RAL

Luminys | N9 4MP License Plate Recognition Camera, 10-50mm Motorized Vari-Focal, IR LEDs | N9L-4RAL

No reviews yet Write a Review
SKU:
LM-N9L-4RAL

The Luminys N9L-4RAL puts accurate license plate recognition on jobs where vehicle tracking actually matters -- parking structures, gated communities, toll plazas, and commercial driveways. A 10-50mm motorized vari-focal lens lets you dial in the capture distance without climbing the pole, and 6 built-in IR illuminators push read range to 98 ft in complete darkness.

Built for vehicle access control

The N9L-4RAL reads plates at speeds up to 50 mph with 99% ANPR accuracy, classifies 10 vehicle types, reads up to 12 vehicle colors, and flags front-seat occupancy -- all from a single camera. LumiTrajectory logs the plate number and vehicle path so you have a clean audit trail without stitching together clips. The Luminys LPR Gate System pairs directly with this camera to automate entry and exit control based on plate match. NDAA compliant, IP67 rated, and PoE+ powered -- no transformer, no separate power run.

Key features

  • 99% ANPR accuracy: reads plates at up to 50 mph (80.5 km/h), capture distance 26 to 98 ft
  • 10-50mm motorized vari-focal lens: adjust focal length remotely without physical access to the camera
  • 6 IR illuminators: adjustable brightness, up to 98 ft illumination range in complete darkness
  • LumiTrajectory analytics: logs plate number and vehicle path through the monitored zone
  • Vehicle attribute classification: 10 vehicle types, 12 color categories, front-seat occupancy detection
  • Wiegand + RS-485 outputs: integrates directly with gate controllers and access panels
  • IP67 rated, NDAA compliant: cleared for outdoor deployment and government or federal projects

System requirements

Powers via PoE+ (IEEE 802.3at) or 12V DC. Requires a compatible NVR or VMS with ONVIF Profile S/T support. Wiegand output integrates with gate controllers; RS-485 ports support coil triggers and additional I/O. Local storage via TF card (up to 128 GB) or via ANR to platform/FTP. Pole mounting requires the LUM-P01 bracket (sold separately).

Brand:
Luminys
Form factor:
Bullet, IP, N9 Series (Specialty)
Image sensor:
1/1.8-in. 4MP Progressive CMOS
Resolution:
4MP (2688 Ɨ 1520)
Lens:
10-50mm Motorized Vari-Focal
Field of view:
H: 40.6Ā° - 9.3Ā° / V: 22.7Ā° - 5.3Ā° (Wide to Tele)
IR range:
Up to 30 m (98 ft), 6x IR illuminators with adjustable brightness
Min illumination:
0.002 Lux (illuminator on)
LPR speed:
Up to 80.5 km/h (50 mph)
Capture distance:
8 to 30 m (26 to 98 ft)
ANPR accuracy:
ā‰„99%
WDR:
96 dB
Video compression:
H.265, H.264M, H.264H, MJPEG
Frame rate:
Up to 30 fps (all streams)
Power input:
12V DC or PoE+ (IEEE 802.3at)
Power consumption:
Storage:
Built-in TF card slot, up to 128 GB; ANR via platform/FTP
Network interface:
1x RJ-45 (100/1000 Mbps), 2x RS-485, 1x Wiegand
Interoperability:
ONVIF Profile S/T, CGI, SDK
Alarm I/O:
2-channel optocoupler input, 2-channel relay output
Audio:
1x audio output (RCA)
Operating temp:
-30 to 65Ā°C (-22 to 149Ā°F), 10-90% RH non-condensing
Weather rating:
IP67
Dimensions:
497.4 Ɨ 121.6 Ɨ 130.0 mm (19.6 Ɨ 4.8 Ɨ 5.1 in.)
Weight:
3.2 kg (7.05 lb)
Mounting:
Wall, pole, or ceiling mount
Material:
Metal and plastic
Compliance:
NDAA
Certifications:
FCC, IC
What recording platform does this camera require?
The N9L-4RAL is ONVIF Profile S/T compatible and works with any compliant NVR or VMS. It also integrates with the Luminys LumiCenter platform for centralized LPR management and reporting.
Does it need an external trigger or ground loop coil to capture plates?
No. The camera supports both I/O coil triggers and software-based video detection, so it can initiate plate reads automatically on vehicle entry without additional hardware.
How far away can it accurately read a license plate?
Capture distance is 8 to 30 m (26 to 98 ft) with the 10-50mm motorized lens dialed in. IR illumination extends effective range to 30 m in total darkness.
Can this camera control a gate or barrier directly?
Yes. The camera includes a Wiegand channel and 2-channel relay output for direct connection to gate controllers. Paired with the Luminys LPR Gate System, it automates both entry and exit control based on plate match.
Is this camera NDAA compliant?
Yes. The N9L-4RAL is NDAA compliant and holds FCC and IC certifications. Safe for federal, state, and government-funded deployments.
How is this camera powered?
PoE+ (IEEE 802.3at) or 12V DC. Power consumption is under 20W -- a single PoE+ port on your switch covers it with no transformer or separate power run needed.
What vehicle types and attributes can the camera classify?
The camera classifies 10 vehicle types (sedan, SUV, van, pickup truck, small/medium/large truck, bus, MPV, medium bus), 12 vehicle colors, and detects front-seat occupancy. It also flags licensed vs. unlicensed plates.

Spec Sheet

Download File

Related Products