The SAL-1LAB lets you run Ethernet and PoE over existing coax - no new cable pulls required. Plug the transmitter into your PoE switch and the receiver at the camera end, and the link carries both data and power over the RG-59 that's already in the wall. The kit ships with both units, so one SKU covers the full connection.
At distances up to 400 meters on RG-59, you get full 100 Mbps throughput - enough for most IP cameras on legacy coax runs. Even at 1,000 meters (3,300 ft), the link holds at 10 Mbps for lower-bandwidth devices. IEEE 802.3af/at compliance means standard PoE switches work without injectors or adapters, and each unit draws under 2 watts.
- Reuse existing RG-59 coax runs instead of pulling new Cat cable
- Full 100 Mbps throughput up to 400m, 10 Mbps up to 1,000m
- Passes PoE (802.3af/at) to power cameras at the far end - no local power supply needed
- Plug-and-play - no configuration, no software, no DIP switches
- Compact form factor (3.11 x 2.05 x 0.91 in.) fits tight junction boxes
- Up to 8 extenders per PoE switch for multi-camera coax-to-IP conversions
Brand:
Luminys
Power Source:
PoE Passthrough (IEEE 802.3af/at)
Standards:
IEEE 802.3af, IEEE 802.3at
Compatibility:
Any 10/100 Mbps Ethernet device; RG-59 coax
Certifications:
FCC, IC (CAN ICES-3)
Interface:
1 x RJ-45 10/100 Mbps, 1 x BNC (per unit)
Max Distance (100 Mbps):
400m / 1,312 ft (RG-59)
Max Distance (10 Mbps):
1,000m / 3,300 ft (RG-59)
Max Extenders Per Switch:
8
Power Consumption:
< 2W per unit
Operating Temperature:
-22Ā°F to 149Ā°F (-30Ā°C to 65Ā°C)
Storage Temperature:
-22Ā°F to 149Ā°F (-30Ā°C to 65Ā°C)
Casing Material:
PC + ABS
Dimensions (per unit):
3.11 x 2.05 x 0.91 in. (79.0 x 52.0 x 23.0 mm)
Weight (packaged):
0.51 lbs (0.23 kg)
Bundle Contents:
1 x Transmitter, 1 x Receiver, Mounting Hardware
