16-Port Gigabit Rackmount Switch, Unmanaged, 1U 19-Inch Steel Case, Fanless
SKU TPL-TL-SG1016 Model TL-SG1016
- Sixteen Gigabit RJ45 ports with 32 Gbps of switching capacity for a busy closet
- Fits a standard 1U 19-inch rack, rackmount kits and rubber feet included
- Isolation mode and loop prevention protect a flat network without setup
- Fanless and unmanaged at 10.68 W maximum draw, plug and play out of the box
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports16 x Gigabit
- Mount1U 19-inch rack
- Power10.68 W max
- Size17.3 x 5.5 x 1.7 in, fanless
The TL-SG1016 is an unmanaged 16-port Gigabit switch in a 1U 19-inch rackmount steel case, a drop-in way to add wired ports to a closet or small rack. Plug it in and it works.
Built for small racks and closets
All 16 RJ45 ports run 10/100/1000 Mbps with auto negotiation and auto MDI/MDIX, backed by 32 Gbps of switching capacity and an 8K MAC address table. Isolation mode and loop prevention are built in, and the fanless case runs on a 100-240V AC internal supply with a standard power cord.
Key features
- 16 x Gigabit RJ45 ports: with 32 Gbps switching capacity
- 1U 19-inch rackmount: rackmount kits included
- Isolation mode and loop prevention: built in, no setup
- Fanless: silent in a closet or at a desk
- Plug and play: unmanaged, nothing to configure
System requirements
None. Uses a standard AC power cord (included).
Specifications
| SKU | TPL-TL-SG1016 |
|---|---|
| Brand | TP-Link |
| Form factor | 16-port Gigabit unmanaged 19-inch rackmount switch |
| Communication | Ethernet / IP |
| Power input | 100-240V AC, 50/60 Hz (power cord included) |
| Power consumption | 10.68 W max (220 V / 50 Hz) |
| Management | Unmanaged |
| Port speed | Gigabit |
| Ethernet ports | 16 x 10/100/1000 Mbps RJ45, auto negotiation, auto MDI/MDIX |
| Switching capacity | 32 Gbps |
| Packet forwarding rate | 23.8 Mpps |
| MAC address table | 8K |
| Jumbo frame | 10 KB |
| Security | Physical security lock slot |
| Communication notes | Isolation mode on ports 1-14, loop prevention on ports 1-16, 802.1p/DSCP QoS, 802.3x flow control, Green Technology |
| Cooling | Fanless |
| Mounting | 1U 19-inch rack mount |
| Dimensions | 17.3 x 5.5 x 1.7 in (440 x 140 x 44 mm) |
| Operating temp | 32°F to 104°F (0°C to 40°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | TL-SG1016, power cord, installation guide, rackmount kits, rubber feet |
FAQs
Does the TL-SG1016 need to be configured?
No. It is unmanaged and works out of the box. There is no web interface or VLAN support.
Can it be rack mounted?
Yes. It is a 1U 19-inch rackmount switch and rackmount kits are included. Rubber feet are included if it sits on a shelf.
Does it have loop prevention?
Yes. Loop prevention covers ports 1 to 16, and isolation mode covers ports 1 to 14.
Is it loud?
No. It is fanless, so it is silent in a closet or at a desk.
Does it supply PoE?
No. For PoE on a 16-port Gigabit switch, look at the TL-SG1016PE.