- Wireless technology Wi-Fi Bluetooth
Omada AX3600 Ceiling Mount Wi-Fi 6 Access Point, 2.5G Port, 802.3at PoE+, 1000+ Clients
SKU TPL-EAP660 HD Model EAP660 HD
- AX3600 dual-band Wi-Fi 6 with 4x4 MU-MIMO and a 1,020+ concurrent client rating
- A 2.5 Gigabit PoE+ port keeps the uplink from limiting a busy AP
- Powers from 802.3at PoE or the included 12V/2A DC adapter for non-PoE sites
- Ceiling, wall, junction box and T-bar mounting; Bluetooth 5.2; Omada managed
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- ConnectivityAX3600 Wi-Fi 6
- PoE802.3at PoE+ or 12V DC
- Ports1 x 2.5G RJ45
- Range2150 sq ft, 1,020+ clients
- MountCeiling, wall, T-bar, J-box
The Omada EAP660 HD is an AX3600 ceiling-mount Wi-Fi 6 access point with a 2.5 Gigabit PoE+ port and a rating of 1,020+ concurrent clients. It targets lecture halls, conference spaces and busy offices where the uplink, not just the radio, can become the bottleneck.
Built for high-density Wi-Fi
Eight internal antennas (4 x 6 dBi on 2.4 GHz, 4 x 6.5 dBi on 5 GHz) with 4x4 DL MU-MIMO on both bands give up to 2402 Mbps on 5 GHz and 1148 Mbps on 2.4 GHz, with a 2150 sq ft coverage rating. Power from 802.3at PoE or the included 12V/2A DC adapter. Ceiling, wall, junction box and T-bar mounting is supported.
Key features
- 2.5G PoE+ uplink: a single 2.5 Gigabit port carries the full AX3600 load
- 1,020+ client rating: 4x4 DL MU-MIMO on both bands for dense environments
- AX3600 dual-band Wi-Fi 6: 2402 Mbps on 5 GHz and 1148 Mbps on 2.4 GHz
- Power adapter included: 802.3at PoE or 12V/2A DC
- Bluetooth 5.2: on board alongside the Wi-Fi radios
- Omada managed: roaming, mesh and captive portal through an Omada controller
System requirements
Omada Mesh, roaming and captive portal require an Omada controller; zero-touch provisioning requires an Omada controller. Wi-Fi 6 features depend on the client devices supporting them.
Specifications
| SKU | TPL-EAP660 HD |
|---|---|
| Brand | TP-Link |
| Form factor | Ceiling-mount dual-band Wi-Fi 6 access point |
| Communication | Ethernet / IP |
| Power input | 802.3at PoE or 12V/2A DC (adapter included) |
| Power consumption | 22.5 W max (US) |
| Wi-Fi standard | Wi-Fi 6 |
| PoE | 802.3at PoE+ |
| Port speed | 2.5G |
| Works with | Omada |
| Ethernet ports | 1 x 2.5 Gigabit RJ45 (802.3at PoE in) |
| Wireless standards | IEEE 802.11ax/ac/n/g/b/a |
| Wireless speed | Up to 2402 Mbps on 5 GHz, up to 1148 Mbps on 2.4 GHz |
| Concurrent clients | 1,020+ |
| Coverage | 2150 sq ft (200 m²) |
| Antennas | Internal omni: 4 x 6 dBi (2.4 GHz), 4 x 6.5 dBi (5 GHz) |
| Bluetooth | Version 5.2 |
| SSIDs | Up to 16 (8 per band) |
| Wireless security | WEP, WPA, WPA2 and WPA3 Personal/Enterprise, 802.1X, captive portal, rogue AP detection, client isolation, SSID to VLAN mapping |
| Controller management | Omada Cloud-Based, Hardware and Software Controller; Omada app |
| Communication notes | SNMP v1/v2c/v3, SSH, HTTP/HTTPS web management, local/remote syslog, management VLAN, L3 management |
| Mounting | Ceiling, wall, junction box or T-bar (kits included) |
| Dimensions | 8.7 x 8.7 x 1.3 in (220 x 220 x 32.5 mm) |
| Operating temp | 32°F to 104°F (0°C to 40°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC/IC, CE/NTRA, JRF, VCCI |
| Package contents | EAP660 HD, power adapter, mounting kit, installation guide, cable compartment cover |
