- Wireless technology Wi-Fi Bluetooth
Omada BE15000 8-Stream Ceiling Mount Tri-Band Wi-Fi 7 Access Point with 10G PoE++ Port, 6 GHz
SKU TPL-EAP787 Model EAP787
- BE15000 8-stream tri-band Wi-Fi 7 with dedicated RF scanning
- 10G Ethernet port, powered by 802.3bt PoE++ or a 12V DC supply (adapter not included)
- 510+ concurrent clients over 2000 sq ft with 320 MHz channels
- Ceiling, wall, junction box and T-bar kits included, managed in Omada SDN
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- ConnectivityBE15000 tri-band Wi-Fi 7
- PoE802.3bt PoE++ or 12V DC
- Ports1 x 10G RJ45
- Range2000 sq ft, 510+ clients
- MountCeiling, wall, J-box, T-bar
The Omada EAP787 is the flagship BE15000 tri-band Wi-Fi 7 ceiling access point, with eight spatial streams and a 10G Ethernet port. It adds dedicated RF scanning, so the AP keeps watching the spectrum for interference without taking airtime from clients. TP-Link rates it for 510+ concurrent clients over 2000 sq ft.
Built for the network installer
BE15000 delivers up to 8648 Mbps on 5 GHz, 5765 Mbps on 6 GHz and 688 Mbps on 2.4 GHz, with 320 MHz channels, MLO, Multi-RUs and 4K-QAM. Power it from 802.3bt PoE or 12V DC; on 802.3at the AP runs but the system LED reports insufficient power. Ceiling, wall, junction box and T-bar kits are included, and the AP adopts into an Omada site for zero-touch provisioning, mesh and roaming.
Key features
- Dedicated RF scanning: monitors the spectrum and avoids interference without affecting client data
- BE15000 tri-band Wi-Fi 7: 8 streams across 2.4, 5 and 6 GHz with 320 MHz channels
- 10G Ethernet port: multi-gigabit uplink, 10M to 10 Gbps
- 802.3bt PoE++ or 12V DC: 12V/2.5A DC input, adapter not included
- 510+ concurrent clients: for lecture halls, open offices and venues
- Ceiling, wall, junction box and T-bar kits included: no extra bracket to order
System requirements
Zero-touch provisioning, mesh, roaming and captive portal require an Omada controller: Omada Central (cloud-based), an Omada hardware controller or the Omada Software Controller. Full power needs an 802.3bt PoE source or a 12V/2.5A DC supply (not included). 6 GHz, MLO and 320 MHz depend on client support and local regulations.
Specifications
| SKU | TPL-EAP787 |
|---|---|
| Brand | TP-Link |
| Form factor | Ceiling-mount 8-stream tri-band Wi-Fi 7 access point |
| Communication | Ethernet / IP |
| Power input | 802.3bt PoE++ or 12V/2.5A DC (adapter not included); 802.3at runs with reduced power |
| Power consumption | 29 W max (PoE); 24.5 W max (DC) |
| Wi-Fi standard | Wi-Fi 7 |
| PoE | 802.3bt PoE++ |
| PoE | 802.3at PoE+ |
| Port speed | 10G |
| Port speed | 2.5G |
| Works with | Omada |
| Ethernet ports | 1 x 10G/2.5G RJ45 (10M to 10 Gbps), PoE in |
| Wireless standards | IEEE 802.11be/ax/ac/n/g/b/a |
| Wireless speed | Up to 8648 Mbps on 5 GHz, 5765 Mbps on 6 GHz, 688 Mbps on 2.4 GHz |
| Channel width | Up to 320 MHz on 6 GHz |
| Concurrent clients | 510+ |
| Coverage | 2000 sq ft (185 m²) |
| Antennas | Internal: 2 x 4 dBi (2.4 GHz), 4 x 5 dBi (5 GHz), 2 x 5 dBi (6 GHz) |
| Bluetooth | Internal antenna module (firmware update may be required) |
| SSIDs | Up to 24 (8 per band) |
| Wireless security | WPA3, WPA2 and WPA Personal/Enterprise, captive portal, rogue AP detection, client isolation, VLAN, MAC filter |
| Controller management | Omada Central (Cloud-Based), hardware or Software Controller; Omada app |
| Communication notes | SNMP v1/v2c/v3, web UI, local/remote syslog, email alerts, LED on/off control |
| Mounting | Ceiling, wall, junction box or T-bar (kits included) |
| Dimensions | 8.7 x 8.7 x 1.5 in (220 x 220 x 38.8 mm) |
| Operating temp | 32°F to 104°F (0°C to 40°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE, NCC, VCCI, JRF, BSMI; Wi-Fi Alliance Wi-Fi 7 (R1) |
| Package contents | EAP787, installation guide, ceiling/wall/junction box mounting kit (power adapter not included) |
