TP-Link

Omada BE5000 Indoor/Outdoor Dual-Band Wi-Fi 7 Access Point, IP66, Directional and Omni Antennas with 3-Year Omada Device Support

SKU TPL-EAP725-Outdoor-S3 Model EAP725-Outdoor-S3

  • BE5000 dual-band Wi-Fi 7 outdoor access point with MLO and 4K-QAM
  • Built-in directional antennas plus detachable omni antennas in one unit
  • IP66 enclosure with 6kV lightning protection, rated -22°F to 158°F
  • Powers from 802.3at PoE+ over one cable, managed through Omada SDN
Also available as
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • ConnectivityBE5000 Wi-Fi 7, dual-band
  • PoE802.3at PoE+
  • Ports1 x 2.5G RJ45
  • Weather ratingIP66
  • MountPole or wall, kits included

This SKU is the EAP725-Outdoor bundled with 3 years of Omada Device Support from TP-Link. The hardware is identical to the standalone EAP725-Outdoor.

The Omada EAP725-Outdoor is an IP66 dual-band Wi-Fi 7 access point for parking lots, yards, campuses and warehouse docks. It carries both built-in directional antennas and detachable omnidirectional antennas, so one SKU covers a focused sector or a wide area depending on how you set it up on site.

Built for the outdoor installer

BE5000 delivers up to 4324 Mbps on 5 GHz and 688 Mbps on 2.4 GHz over a single 2.5G port that takes 802.3at PoE+, so there is no separate power run. The sealed enclosure is rated IP66 with 6kV lightning protection and an operating range of -22°F to 158°F, and pole and wall kits are included. Adopt it into the customer's Omada site for zero-touch provisioning, mesh and roaming.

Key features

  • IP66 weatherproof enclosure: dust-tight and rated for outdoor mounting, with 6kV lightning protection
  • Two antenna modes: built-in directional antennas (90° and 45° beamwidth) or detachable omnidirectional antennas
  • One cable: 2.5G port powered by 802.3at PoE+
  • Pole and wall kits included: mounting hardware is in the box
  • Wide temperature range: operates from -22°F to 158°F (-30°C to 70°C)
  • Bluetooth LE 5.2: on board alongside the Wi-Fi radios

System requirements

Mesh, roaming, captive portal and zero-touch provisioning require an Omada controller: the Omada Cloud-Based Controller, an Omada hardware controller or the Omada Software Controller. Power requires an 802.3at PoE+ switch or injector. Wi-Fi 7 features depend on the client devices supporting them.

Specifications

SKUTPL-EAP725-Outdoor-S3
BrandTP-Link
Form factorIndoor/outdoor dual-band Wi-Fi 7 access point
Support plan3-year Omada Device Support (included)
CommunicationEthernet / IP
Power input802.3at PoE+
Power consumption18.4 W max (PoE+)
Wi-Fi standardWi-Fi 7
PoE802.3at PoE+
Port speed2.5G
Works withOmada
Ethernet ports1 x 2.5G RJ45 (10/100/1000/2500 Mbps), PoE in
Wireless standardsIEEE 802.11be/ax/ac/n/g/b/a
Wireless speedUp to 4324 Mbps on 5 GHz, up to 688 Mbps on 2.4 GHz
AntennasExternal omni: 2 x 4.5 dBi (2.4 GHz), 2 x 5.3 dBi (5 GHz); internal directional: 2 x 8.3 dBi (2.4 GHz, 90°), 2 x 13.2 dBi (5 GHz, 45°)
BluetoothBLE 5.2
SSIDsUp to 16 (8 per band)
Wireless securityWPA3, WPA2 and WPA Personal/Enterprise, OWE, 802.1X, captive portal, rogue AP detection, client isolation, SSID to VLAN mapping
Controller managementOmada Cloud-Based, hardware or Software Controller; Omada app
Communication notesSNMP v1/v2c/v3, SSH, web UI, local/remote syslog, email alerts, L3 management, multi-site management, management VLAN
Weather ratingIP66
MountingPole or wall (kits included)
Dimensions8.19 x 6.3 x 2.17 in (208 x 160 x 55 mm)
Operating temp-22°F to 158°F (-30°C to 70°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceCE, FCC, IC, NCC, VCCI, JRF, BSMI
Package contentsEAP725-Outdoor, mounting kit, installation guide

Documents and resources

FAQs

What is the EAP725-Outdoor weather rating?
IP66, with 6kV lightning protection. It operates from -22°F to 158°F (-30°C to 70°C).
Does it use directional or omni antennas?
Both are available. It has built-in directional antennas and detachable omnidirectional antennas, and you choose the mode on site.
How is the EAP725-Outdoor powered?
From an 802.3at PoE+ switch or injector on its single 2.5G port. No separate power adapter is used.
Do I need an Omada controller?
Mesh, roaming, captive portal and zero-touch provisioning require an Omada Cloud-Based, hardware or Software Controller.
Is mounting hardware included?
Yes. A mounting kit for pole or wall installation is included.