Omada Access Plus 48-Port Gigabit L2+ Managed Switch with 4 10G SFP+ Slots, Fanless with 3-Year Omada Device Support
SKU TPL-SG3452X-S3 Model SG3452X-S3
- 48 Gigabit RJ45 ports with four 10G SFP+ uplink slots
- Fanless and 8.7 inches deep, so it suits shallow racks and quiet closets
- L2+ static routing, 4K VLANs, QinQ, ACLs and 802.1X with RADIUS or TACACS+
- Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports48 x Gigabit, 4 x SFP+
- ConnectivityL2+ managed, Omada
- Power32.72 W max, fanless
- Mount19-inch rack
- Size17.3 x 8.7 x 1.7 in
This SKU is the SG3452X bundled with 3 years of Omada Device Support from TP-Link. The hardware is identical to the standalone SG3452X.
The Omada SG3452X is a 48-port Gigabit L2+ managed switch with four 10G SFP+ slots, a fanless design and 176 Gbps of switching capacity, built for dense access closets where you want managed features without fan noise. It joins the same Omada site as the gateway and access points.
Built for dense, quiet access closets
Forty-eight Gigabit ports cover desks, drops and uplinks to other closets, and four 10G SFP+ slots carry the trunk to the core. Static routing, 802.1Q VLANs, QinQ, ACLs, 802.1X and IGMP snooping handle segmentation. Manage it from an Omada controller or standalone through the web UI, CLI and SNMP.
Key features
- 48 Gigabit RJ45 ports: wire-speed access for a full closet
- Four 10G SFP+ slots: uplinks to the core or between buildings
- Fanless design: no fan noise, 32.72 W maximum power draw
- L2+ features: static routing, DHCP server, VLANs, QinQ, ACLs and ERPS
- Zero-touch provisioning: through the Omada Cloud-Based Controller
- Rackmount case: rackmount kit and rubber feet included
System requirements
Centralized management needs an Omada Cloud-Based, Hardware or Software Controller; zero-touch provisioning needs the cloud-based controller. Without a controller the switch runs standalone from its web interface and CLI. SFP+ modules and DAC cables are sold separately.
Specifications
| SKU | TPL-SG3452X-S3 |
|---|---|
| Brand | TP-Link |
| Form factor | 48-port Gigabit L2+ managed switch with 4 SFP+ slots, rackmount |
| Support plan | 3-year Omada Device Support (included) |
| Communication | Ethernet / IP |
| Power input | 100-240V AC, 50/60 Hz |
| Power consumption | 32.72 W max at 110V/60 Hz |
| Management | L2+ Managed |
| Port speed | Gigabit |
| Port speed | 10G |
| Works with | Omada |
| Ethernet ports | 48 x 10/100/1000 Mbps RJ45 |
| SFP slots | 4 x 10G SFP+ |
| Console ports | 1 x RJ45, 1 x Micro-USB |
| Switching capacity | 176 Gbps |
| Packet forwarding rate | 130.94 Mpps |
| MAC address table | 16K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLANs, MAC, protocol, private and voice VLAN, QinQ, GVRP |
| L2+ features | 48 IPv4/IPv6 static routes, DHCP server and relay, link aggregation, STP, ERPS, loopback detection, port mirroring |
| Security | 802.1X with RADIUS and TACACS+ AAA, ACLs, DHCP snooping, ARP inspection, port security, storm control, DoS defend, HTTPS and SSH management |
| Controller management | Omada Cloud-Based, Hardware and Software Controllers; Omada app |
| Communication notes | Web GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, IPv6, dual image and dual configuration |
| Cooling | Fanless |
| Surge protection | 6 kV |
| Mounting | 19-inch rack (rackmount kit and rubber feet included) |
| Dimensions | 17.3 x 8.7 x 1.7 in (440 x 220 x 44 mm) |
| Operating temp | 23°F to 113°F (-5°C to 45°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | CE, FCC |
| Package contents | SG3452X, power cord, quick installation guide, rackmount kit, rubber feet |
