TP-Link

Omada 24-Port Gigabit Stackable L3 Managed Switch, 4 10G SFP+ Slots, Dual Internal Power Supplies with 5-Year Omada Device Support

SKU TPL-SG6428X-S5 Model SG6428X-S5

  • 24 Gigabit RJ45 ports with 128 Gbps switching capacity per unit
  • 4 SFP+ slots at 10G for uplinks, all of which can carry a stacking link
  • Full L3: static routing, RIP, OSPF, ECMP, VRRP, PIM-DM and DHCP server
  • Two internal power supplies and ERPS for redundancy; no PoE output
Also available as
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • Ports24 x Gigabit, 4 x 10G SFP+
  • ConnectivityL3 managed, stackable
  • PowerDual internal supplies
  • Mount19-inch rack
  • Size17.3 x 15.0 x 1.7 in

This SKU is the SG6428X bundled with 5 years of Omada Device Support from TP-Link. The hardware is identical to the standalone SG6428X.

The Omada SG6428X is a 24-port Gigabit stackable L3 managed switch with four 10G SFP+ slots and two internal fixed power supplies, a solid core or distribution switch for a mid-size site. It is managed in the same Omada site as the gateway and APs.

Built for a routed core with built-in redundancy

Full L3 routing covers static routes, RIP, OSPF, ECMP, VRRP and PIM-DM, with a DHCP server and relay for VLAN gateways. Two internal power supplies and ERPS ring protection keep the closet up through a single failure, and up to 8 units stack in standalone mode (4 in controller mode) over the SFP+ slots. There is no PoE output, so pair it with PoE switches at the edge.

Key features

  • Full L3 routing: static routes, RIP, OSPF, ECMP, VRRP, PIM-DM and DHCP server and relay
  • Two internal power supplies: redundant power inside a 1U chassis
  • Four 10G SFP+ slots: fiber uplinks or stacking links, up to 80 Gbps of stacking bandwidth
  • Stacks up to 8 units: in standalone mode, or 4 units in controller mode
  • 128 Gbps switching: with a 32K MAC table for larger Layer 2 domains
  • Omada zero-touch provisioning: and batch firmware upgrades through the cloud-based controller

System requirements

Centralized management needs an Omada Cloud-Based Controller, Hardware Controller or Software Controller; zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its web interface, CLI and SNMP. The SFP+ slots need separate modules.

Specifications

SKUTPL-SG6428X-S5
BrandTP-Link
Form factor24-port Gigabit L3 managed switch with 4 SFP+ slots, rack mount
Support plan5-year Omada Device Support (included)
CommunicationEthernet / IP
Power inputTwo internal fixed power supplies, 100-240V AC, 50/60 Hz
Power consumption28.4 W max at 220V
ManagementL3 Managed
Port speedGigabit
Port speed10G
Works withOmada
Ethernet ports24 x Gigabit RJ45
SFP slots4 x 10G SFP+
Console ports1 x RJ45, 1 x USB Type-C; 1 x RJ45 management port
StackingUp to 8 units standalone, 4 in controller mode, up to 80 Gbps (4 stacking ports)
Switching capacity128 Gbps per unit
Packet forwarding rate95.2 Mpps
MAC address table32K
Jumbo frame9 KB
VLANs4K 802.1Q VLANs, MAC, protocol, voice, private and multicast VLAN, GVRP, QinQ (256 entries)
L3 featuresStatic routing (1,024 IPv4, 512 IPv6), RIP v1/v2, OSPF v2/v3, VRRP v2/v3, ECMP, PIM-DM, DHCP server and relay, ERPS, link aggregation, STP
Security802.1X with RADIUS, AAA with TACACS+, DHCP snooping, ARP inspection, IP source guard, port security, storm control, DoS defend, HTTPS and SSHv2 management
Controller managementOmada Cloud-Based, Hardware and Software Controller; Omada app
Communication notesWeb GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, sFlow, IPv6, dual image and dual configuration
Cooling4 internal fixed fans
Mounting19-inch rack (rackmount kit included)
Dimensions17.3 x 15.0 x 1.7 in (440 x 380 x 44 mm)
Operating temp23°F to 122°F (-5°C to 50°C) up to 300 m, 23°F to 113°F (-5°C to 45°C) at 2,000 m, 23°F to 104°F (-5°C to 40°C) at 3,000 m
Operating humidity10 to 90% RH, non-condensing
Package contentsSG6428X, 2 power cords, RJ45 console cable, rackmount kit, rubber feet, quick installation guide

Documents and resources

FAQs

Does the SG6428X provide PoE?
No. It has 24 Gigabit RJ45 ports with no PoE output. The PoE+ version is the SG6428XHP.
Does it need an Omada controller?
No. It runs standalone from its web interface, CLI and SNMP. A controller adds centralized management, and the cloud controller adds zero-touch provisioning.
Can it route between VLANs?
Yes. It is a full L3 switch with static routing, RIP, OSPF, ECMP, VRRP, PIM-DM and a DHCP server, so it can act as the routing core for the site.
How many switches can be stacked?
Up to 8 units in standalone mode and up to 4 units in controller mode, using the 10G SFP+ slots as stacking ports.
Can I swap a failed power supply?
The two power supplies are internal and fixed, not hot-swappable modules. Either one can carry the switch if the other fails.