Omada 48-Port Gigabit Stackable Lite L3 Managed PoE++ Switch, 8 PoE++ Ports, 770 W, 4 SFP+ Slots with 1-Year Omada Device Support
SKU TPL-SG5452XMPP-S1 Model SG5452XMPP-S1
- 8 PoE++ ports at up to 90 W and 40 PoE+ ports at up to 30 W on a 770 W budget
- 4 SFP+ slots at 1/10G for uplinks, any of which can carry a stacking link
- Stack up to 4 units; static routing, RIP, OSPF, VRRP and DHCP server built in
- Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports48 x Gigabit PoE, 4 x SFP+
- PoE770 W, up to 90 W per port
- ConnectivityL3 managed, stackable
- Mount19-inch rack
- Size17.3 x 13.0 x 1.7 in
This SKU is the SG5452XMPP bundled with 1 year of Omada Device Support from TP-Link. The hardware is identical to the standalone SG5452XMPP.
The Omada SG5452XMPP is a 48-port Gigabit stackable Lite L3 managed switch with eight 802.3bt PoE++ ports at up to 90 W, forty PoE+ ports at up to 30 W and a 770 W budget. Four 1/10G SFP+ slots carry uplinks or stacking links, and the switch is managed in the same Omada site as the gateway and APs.
Built for big PoE closets
Ports 1 to 8 give 802.3bt devices up to 90 W each, and ports 9 to 48 cover cameras, access points and phones at up to 30 W. Fast PoE and Perpetual PoE keep devices running through a switch reboot. Static routing, RIP, OSPF, VRRP and a DHCP server handle routing at the edge, and up to four units stack over the SFP+ slots.
Key features
- 770 W PoE budget: eight PoE++ ports at up to 90 W and forty PoE+ ports at up to 30 W
- Fast PoE and Perpetual PoE: devices power up early on a cold start and stay powered through a switch reboot
- Four 1/10G SFP+ slots: fiber uplinks or stacking links
- Stacks up to four units: up to 40 Gbps of stacking bandwidth using up to two stacking ports
- Lite L3 routing: static routes, RIP, OSPF, VRRP and DHCP server and relay
- Zero-touch provisioning: and batch firmware upgrades through the Omada Cloud-Based Controller
System requirements
Centralized management needs an Omada Cloud-Based Controller (built-in 5.15.22 or later), Hardware Controller or Software Controller (built-in 5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its web interface, CLI and SNMP. Powered devices must be 802.3af, 802.3at or 802.3bt compliant. The 770 W budget is based on lab testing and varies with the connected devices. SFP+ slots need separate modules.
Specifications
| SKU | TPL-SG5452XMPP-S1 |
|---|---|
| Brand | TP-Link |
| Form factor | 48-port Gigabit Lite L3 managed PoE++ switch with 4 SFP+ slots, rack mount |
| Support plan | 1-year Omada Device Support (included) |
| Communication | Ethernet / IP |
| Power input | 100-240V AC, 50/60 Hz |
| Power consumption | 942.7 W max at 110V with 770 W of PoE load (893.6 W at 220V) |
| Management | L3 Managed |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| PoE | 802.3bt PoE++ |
| Port speed | Gigabit |
| Port speed | 10G |
| Works with | Omada |
| Ethernet ports | 48 x Gigabit RJ45 (8 x PoE++, 40 x PoE+) |
| SFP slots | 4 x 1/10G SFP+ |
| Console ports | 1 x RJ45, 1 x USB Type-C |
| PoE budget | 770 W total, up to 90 W on ports 1-8 and 30 W on ports 9-48 |
| PoE features | Fast PoE, Perpetual PoE |
| Stacking | Up to 4 units, up to 40 Gbps (max 2 stacking ports) |
| Switching capacity | 176 Gbps per unit |
| Packet forwarding rate | 130.94 Mpps |
| MAC address table | 16K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLANs, MAC, protocol, voice, private and multicast VLAN, GVRP, QinQ (256 entries) |
| L3 features | Static routing (512 IPv4, 128 IPv6), RIP v1/v2, OSPF v2/v3, VRRP v2/v3, DHCP server (64 pools) and relay, proxy ARP, ERPS, link aggregation, STP |
| Security | 802.1X with RADIUS, AAA with TACACS+, DHCP snooping, ARP inspection, IP source guard, port security, storm control, DoS defend, HTTPS and SSHv2 management |
| Controller management | Omada Cloud-Based Controller (built-in 5.15.22 or later); Hardware and Software Controller (built-in 5.15.20 or later); Omada app |
| Communication notes | Web GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, sFlow, IPv6, dual image and dual configuration |
| Cooling | 3 fans |
| Mounting | 19-inch rack (mounting brackets included) |
| Dimensions | 17.3 x 13.0 x 1.7 in (440 x 330 x 44 mm) |
| Operating temp | 23°F to 104°F (-5°C to 40°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Package contents | SG5452XMPP, power cord, console cable, mounting brackets, screws, rubber feet, quick installation guide |
