- Wireless technology Wi-Fi Bluetooth
Omada BE11000 Ceiling Mount Tri-Band Wi-Fi 7 Access Point with 6 GHz, 10G PoE+ Port, 320 MHz with 5-Year Omada Device Support
SKU TPL-EAP773-S5 Model EAP773-S5
- BE11000 tri-band Wi-Fi 7 on 2.4, 5 and 6 GHz with 320 MHz channels
- 10G Ethernet port, powered by 802.3at PoE+ or a 12V DC supply
- 380+ concurrent clients and up to 24 SSIDs for dense deployments
- Ceiling, wall, junction box and T-bar kits included, managed in Omada SDN
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- ConnectivityBE11000 tri-band Wi-Fi 7
- PoE802.3at PoE+ or 12V DC
- Ports1 x 10G RJ45
- Range1500 sq ft, 380+ clients
- MountCeiling, wall, J-box, T-bar
This SKU is the EAP773 bundled with 5 years of Omada Device Support from TP-Link. The hardware is identical to the standalone EAP773.
The Omada EAP773 is a tri-band Wi-Fi 7 ceiling access point with a 10G Ethernet port, for sites where the switch uplink is already multi-gig and the AP should not be the bottleneck. It adds a clean 6 GHz radio to 2.4 and 5 GHz and runs from 802.3at PoE+.
Built for the network installer
BE11000 delivers up to 5765 Mbps on 6 GHz, 4324 Mbps on 5 GHz and 688 Mbps on 2.4 GHz, with 320 MHz channels on 6 GHz, MLO and 4K-QAM. TP-Link rates it for 380+ concurrent clients over 1500 sq ft and up to 24 SSIDs. Ceiling, wall, junction box and T-bar kits are included, and the AP adopts into an Omada site for zero-touch provisioning, mesh and roaming.
Key features
- Tri-band Wi-Fi 7: 2.4 GHz, 5 GHz and 6 GHz radios with 320 MHz channels on 6 GHz
- 10G Ethernet port: multi-gigabit uplink so the wire does not cap the radios
- 802.3at PoE+ or 12V DC: 802.3at needs firmware 1.0.12 or later; adapter not included
- 380+ concurrent clients: MU-MIMO, OFDMA and MLO for dense rooms
- Four mounting kits included: ceiling, wall, junction box and T-bar
- Bluetooth 5.2: on board (firmware update may be required)
System requirements
Zero-touch provisioning, mesh, roaming and captive portal require an Omada controller: Omada Central (cloud-based), an Omada hardware controller or the Omada Software Controller. 802.3at PoE input is supported on firmware 1.0.12 and later; earlier firmware needs 802.3bt. The 12V DC adapter is not included. 6 GHz, MLO and 320 MHz depend on client support and local regulations.
Specifications
| SKU | TPL-EAP773-S5 |
|---|---|
| Brand | TP-Link |
| Form factor | Ceiling-mount tri-band Wi-Fi 7 access point |
| Support plan | 5-year Omada Device Support (included) |
| Communication | Ethernet / IP |
| Power input | 802.3at PoE+ (firmware 1.0.12 or later; earlier firmware needs 802.3bt) or 12V/2.5A DC (adapter not included) |
| Power consumption | 25.4 W max (PoE); 22.4 W max (DC) |
| Wi-Fi standard | Wi-Fi 7 |
| PoE | 802.3at PoE+ |
| Port speed | 10G |
| Works with | Omada |
| Ethernet ports | 1 x 10G RJ45, PoE in |
| Wireless standards | IEEE 802.11be/ax/ac/n/g/b/a |
| Wireless speed | Up to 5765 Mbps on 6 GHz, 4324 Mbps on 5 GHz, 688 Mbps on 2.4 GHz |
| Channel width | Up to 320 MHz on 6 GHz |
| Concurrent clients | 380+ |
| Coverage | 1500 sq ft (140 m²) |
| Antennas | Internal: 2 x 4 dBi (2.4 GHz), 2 x 5 dBi (5 GHz), 2 x 5 dBi (6 GHz) |
| Bluetooth | Version 5.2 (firmware update may be required) |
| SSIDs | Up to 24 (8 per band) |
| Wireless security | WPA3, WPA2 and WPA Personal/Enterprise, captive portal, rogue AP detection, client isolation, VLAN, MAC filter (up to 4,000) |
| Controller management | Omada Central (Cloud-Based), hardware or Software Controller; Omada app |
| Communication notes | SNMP v1/v2c/v3, web UI, local/remote syslog, email alerts, LED on/off control |
| Mounting | Ceiling, wall, junction box or T-bar (kits included) |
| Dimensions | 8.7 x 8.7 x 1.3 in (220 x 220 x 32.5 mm) |
| Operating temp | 32°F to 104°F (0°C to 40°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE, NCC, VCCI, JRF, BSMI; Wi-Fi Alliance Wi-Fi 7 (R1) |
| Package contents | EAP773, installation guide, mounting kit |
