TP-Link

Omada Campus 24-Port Gigabit Stackable L3 Managed Switch with 4 10G SFP+ Slots, Dual Power Supplies with 3-Year Omada Device Support

SKU TPL-S6500-24G4XF-S3 Model S6500-24G4XF-S3

  • 24 Gigabit RJ45 ports with four 1/10G SFP+ slots that double as stacking ports
  • Stack up to 12 units standalone, or 4 units under an Omada controller
  • L3 routing with OSPF, BGP, IS-IS, VRRP, PIM and ECMP, plus MACsec and secure boot
  • Two internal power supplies and four fans, managed in Omada or Omada Pro
Also available as
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • Ports24 x Gigabit, 4 x SFP+
  • ConnectivityL3 managed, stackable
  • PowerDual internal power supplies
  • Mount19-inch rack
  • Size17.3 x 15.0 x 1.7 in

This SKU is the S6500-24G4XF bundled with 3 years of Omada Device Support from TP-Link. The hardware is identical to the standalone S6500-24G4XF.

The Omada Campus S6500-24G4XF is a 24-port Gigabit stackable L3 managed switch with four 10G SFP+ slots and two internal power supplies, built for the access or distribution layer of a campus or multi-building site. It carries full L3 routing and stacks with matching units for a single logical switch.

Built for campus access and distribution

Any of the four SFP+ slots can serve as an uplink or a stacking port, with up to 80 Gbps of stack bandwidth. L3 features include OSPF, BGP, IS-IS, VRRP, PIM and ECMP, and security covers 802.1X, MACsec, secure boot and DHCP snooping. Manage it from an Omada or Omada Pro controller, or standalone through the web UI, CLI and NETCONF.

Key features

  • Four 1/10G SFP+ slots: uplinks or stacking ports, up to 80 Gbps of stack bandwidth
  • Physical stacking: up to 12 units standalone, 4 in Omada controller mode
  • L3 routing: OSPF, BGP, IS-IS, VRRP, PIM, ECMP and policy-based routing
  • Two internal power supplies: redundant input from the built-in modules
  • MACsec and secure boot: link encryption and a verified boot chain
  • Zero-touch provisioning: through an Omada or Omada Pro cloud-based controller

System requirements

Centralized management needs an Omada or Omada Pro Cloud-Based, Hardware or Software Controller; zero-touch provisioning needs the cloud-based controller. Without a controller the switch runs standalone from its web interface, CLI and NETCONF. SFP+ modules and DAC cables are sold separately.

Specifications

SKUTPL-S6500-24G4XF-S3
BrandTP-Link
Form factor24-port Gigabit stackable L3 managed switch with 4 SFP+ slots, rackmount
Support plan3-year Omada Device Support (included)
CommunicationEthernet / IP
Power inputTwo internal fixed power supply modules, 100-240V AC, 50/60 Hz
Power consumption28.4 W max at 220V/50 Hz
ManagementL3 Managed
Port speedGigabit
Port speed10G
Works withOmada
Works withOmada Pro
Ethernet ports24 x 10/100/1000 Mbps RJ45
SFP slots4 x 1/10G SFP+
Console ports1 x RJ45, 1 x USB Type-C
USB2 x USB 2.0
Switching capacity128 Gbps per unit
Packet forwarding rate95.2 Mpps
MAC address table32K
Jumbo frame9 KB
StackingUp to 12 units standalone, 4 in Omada controller mode; any SFP+ slot can stack, up to 80 Gbps stack bandwidth
VLANs4K 802.1Q VLANs, MAC, protocol, voice, private and multicast VLAN, QinQ (256 entries), GVRP
L3 featuresOSPFv2/v3, RIP/RIPng, IS-IS, BGP, VRRP, PIM-SM/DM/SSM, ECMP, BFD, PBR, uRPF, 1,024 IPv4 and 512 IPv6 static routes
L2 featuresLink aggregation, STP, ERPS, loopback detection, port and VLAN mirroring with RSPAN, IGMP and MLD snooping, MVR
Security802.1X with RADIUS and TACACS+ AAA, DHCP snooping, ARP inspection, IP-MAC-port binding, port security, storm control, DoS defend, MACsec (128/256-bit), secure boot, RADSEC
Controller managementOmada and Omada Pro Cloud-Based, Hardware and Software Controllers; Omada app
Communication notesWeb GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, sFlow, NETCONF, dual image and dual configuration, IPv6; 1 x RJ45 management port
Cooling4 internal fixed fans
Mounting19-inch rack (rackmount kit and locking straps included)
Dimensions17.3 x 15.0 x 1.7 in (440 x 380 x 44 mm)
Operating temp23°F to 122°F (-5°C to 50°C) at 300 m; 23°F to 113°F (-5°C to 45°C) at 2,000 m; 23°F to 104°F (-5°C to 40°C) at 3,000 m
Operating humidity10 to 90% RH, non-condensing
Package contentsS6500-24G4XF, power cords, console cable, rackmount kit, rubber feet, locking straps, installation guide

Documents and resources

FAQs

Does the S6500-24G4XF have PoE?
No. It has 24 Gigabit RJ45 ports with no PoE output. The S6500-24GP4XF is the PoE+ version in this family.
How many switches can it stack?
Up to 12 in standalone mode and 4 in Omada controller mode, using the SFP+ slots. Stacking needs 10G DAC or SFP+ modules, not 1G SFP modules.
Does it have redundant power?
Yes. It has two internal fixed power supply modules. They are built in, not field-replaceable.
Which controllers can manage it?
TP-Link lists Omada and Omada Pro Cloud-Based, Hardware and Software Controllers. Zero-touch provisioning needs a cloud-based controller.
What routing protocols does it support?
OSPFv2/v3, RIP/RIPng, IS-IS, BGP, VRRP, PIM, ECMP, BFD and policy-based routing, with 1,024 IPv4 and 512 IPv6 static routes.