• SS&Si
  • Series
  • VIGI
  • TP-Link | VIGI Solar System Controller with 31.2 Ah Lithium Battery, 3 DC Outputs, 10/100 RJ45, IP66 | VIGI PS30
VIGI Solar System Controller with 31.2 Ah Lithium Battery, 3 DC Outputs, 10/100 RJ45, IP66
TP-Link

VIGI Solar System Controller with 31.2 Ah Lithium Battery, 3 DC Outputs, 10/100 RJ45, IP66

SKU TPL-VIGI PS30 Model VIGI PS30

  • 31.2 Ah lithium battery rated for more than 500 cycles
  • Three 5.5 mm DC outputs and a 10/100 Mbps RJ45 for management
  • Remote reboot, firmware update, load control and power statistics
  • Intelligent auxiliary heating for charging and discharging to -22°F
New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

Product highlights

  • Power31.2 Ah lithium battery
  • Ports3 DC outputs, 1 RJ45
  • Connectivity10/100 Mbps RJ45
  • Weather ratingIP66

The VIGI PS30 is a solar system controller with a 31.2 Ah lithium battery. It gives remote VIGI camera sites a managed power source with three 5.5 mm DC outputs and a 10/100 Mbps RJ45 for management.

Built for off-grid camera sites

Intelligent auxiliary heating lets the battery charge and discharge down to -22°F, and the controller adds overdischarge and high and low temperature protection. You can check load status, battery level and power statistics, and reboot or update the controller remotely, so fewer truck rolls.

Key features

  • 31.2 Ah lithium battery: more than 500 cycles, 10.8 V
  • Three DC outputs: 5.5 mm plugs, two at 9 V to 12.6 VDC/2 A, one at 12 VDC/2 A
  • Remote management: load control, schedules, firmware update and remote reboot
  • Intelligent auxiliary heating: cold-weather charging and discharging
  • IP66 rated with a photovoltaic panel connector

System requirements

A solar panel connected to the photovoltaic panel connector, and loads that accept 9 V to 12.6 VDC or 12 VDC through a 5.5 mm DC plug. A LAN connection is needed for local management.

Specifications

SKUTPL-VIGI PS30
BrandTP-Link
Form factorSolar system controller with lithium battery
CommunicationEthernet / IP
Power inputPhotovoltaic panel connector
Power output3 x 5.5 mm DC plugs (#1, #2: 9V to 12.6 VDC/2A; #3: 12 VDC/2A)
Battery typeLithium
Battery capacity31.2 Ah
Battery voltage10.8 V (max. output 12.6 V)
Battery lifeMore than 500 cycles
Ethernet ports1 x 10/100 Mbps RJ45
Charging condition32°F to 113°F (0°C to 45°C); -22°F to 113°F (-30°C to 45°C) with intelligent auxiliary heating
Discharging condition-4°F to 140°F (-20°C to 60°C); -22°F to 140°F (-30°C to 60°C) with intelligent auxiliary heating
Management featuresLoad control, battery level display, power consumption statistics, real-time load status, schedule saving, remote reboot, reset and firmware update, local LAN management
ProtectionHigh and low temperature protection, overdischarge protection
Indicators4 blue LEDs (SYS, LAN, PV, BAT)
Dimensions9.5 x 2.8 x 2.6 in (242 x 70 x 65 mm)
Operating temp-22°F to 140°F (-30°C to 60°C) with intelligent auxiliary heating
Operating humidity10 to 90% RH, non-condensing
Weather ratingIP66
ComplianceCB, PSE (battery), CE, KC, FCC, IP66, VCCI, BSMI
Package contentsVIGI Solar System Controller, Quick Start Guide, waterproof cable attachments, mounting accessories

FAQs

Does the PS30 include a solar panel?
No. It is sold without a solar panel. Connect a panel to the photovoltaic panel connector.
How many devices can it power?
Three 5.5 mm DC outputs: #1 and #2 at 9 V to 12.6 VDC/2 A, and #3 at 12 VDC/2 A.
Can I manage it remotely?
Yes. It supports remote reboot, reset, firmware update, load control and message push, plus local LAN management over the 10/100 RJ45.
Does it work in cold weather?
With intelligent auxiliary heating it charges and discharges down to -22°F. Heating control runs from -22°F to 41°F.
All VIGI