PoE Video Door Station Single-Gang Mounting Plate Kit for ADC-VDB755P

A single-gang plate that doubles as a junction box behind the ADC-VDB755P. Instead of a service loop stuffed into a hole in the siding, the Cat cable terminates in an enclosed space sized for it, with the door station mounting straight onto the plate.

Built for the installer

Containing the wiring matters on a PoE install. The termination is protected from weather and from being pulled when the unit is serviced, and the finished elevation looks like a planned installation rather than a cable coming out of a wall. It also gives a positive mechanical anchor on surfaces where the doorbell's own anchors are marginal.

The kit includes a documented screw set for different mounting situations, with two required sets and two optional sets depending on the surface and configuration.

Key features

• Acts as a junction box so the Cat termination is contained rather than buried in the wall
• Protects the termination from weather and from being pulled during service
• Gives a solid mechanical anchor where the standard anchors are marginal
• Documented screw sets covering different surfaces and configurations

System requirements

For the Alarm.com ADC-VDB755P PoE Video Door Station. See the Alarm.com mounting bracket article for the screw usage guide included with the kit.