Wireless Image Sensor with Night Vision & Dual-Element PIR Motion

SKU ADC-IS-300-LP Model ADC-IS-300-LP

Fast shipping from four branches
30-day returns on unopened products

Questions? Call us 866-364-0030The SS&Si dealer team

A motion sensor that sends a picture with the alarm. Instead of an operator or a customer deciding whether to respond to an unexplained motion event, they see what triggered it. That is the difference between a dispatch decision made blind and one made on evidence.

Built for the alarm installer

It is fully wireless on 900 MHz with around three years of battery life from two lithium AA cells, so it goes where a camera cannot: interior rooms with no power, rental properties, and sites where running cable is not an option. Night vision means it works in an unlit room rather than returning a black frame at the moment it matters.

Dual-element PIR covers 35 feet across a 90 degree field, with three sensitivity levels configurable remotely. Note the operating range differs for pet applications: 32 to 110F normally, but 60 to 110F where pet immunity is in use.

Key features

Sends an image with the alarm, turning a blind dispatch decision into an informed one
Fully wireless with about three years from two lithium AA cells
Night vision so an unlit room still returns a usable image
35 ft range across 90 degrees from a dual-element PIR
Three sensitivity levels configurable remotely, tuned without a site visit
UL certified for humidity up to 85% RH

System requirements

Requires a compatible Alarm.com panel with image sensor support on the 900 MHz band. Two lithium AA batteries are included. Note the narrower 60 to 110F operating range for pet applications.

Specifications

SKU	ADC-IS-300-LP
Brand	Alarm.com
Dimensions	3.0 x 1.8 x 1.8 in
Technology	Dual-element PIR with integrated camera and night vision
Range	35 feet, 90 degree horizontal field of view
Frequency	900 MHz
Sensitivity	3 remotely configurable levels
Form factor	Wireless image sensor with PIR motion detection
Power input	2x AA 1.5V lithium batteries, included
Operating voltage	2.3 to 3.5V
Battery life	Approximately 3 years typical
Operating temp	32F to 110F standard, 60F to 110F for pet applications
Operating humidity	Up to 85% RH, UL certified

FAQs

Why use an image sensor instead of a camera?

It is fully wireless with around three years of battery life, so it covers interior rooms with no power and sites where cable cannot be run. It sends an image with the alarm rather than providing continuous video.

Does the operating range change for pet applications?

Yes. Standard operation is 32 to 110F, but pet applications are rated 60 to 110F. Check the installed location's temperature range if pet immunity is being used.

Can sensitivity be adjusted without a site visit?

Yes. Three sensitivity levels are remotely configurable, so nuisance activations can often be tuned out without returning to site.

How long do the batteries last?

Approximately three years typical from the two included lithium AA cells. Lithium rather than alkaline is specified for the operating voltage range and cold tolerance.