The Centrios Drill Jig is the field tool that locates the two through-bolt holes for a Centrios cylindrical lock install. Drop it into the crossbore you already cut, the tabs center it in place, and the jig gives you the exact drill points for the mounting bolts at either a 2-3/8" or 2-3/4" backset. One tool for both standard backsets, no measuring, no template stickers.
How it works
After the crossbore and edge-bore are cut with a standard hole saw, the drill jig drops into the crossbore and locks in with its alignment fingers. The jig is labeled on-tool for the two standard backsets (2-3/8" and 2-3/4") and calls out the 5/16" drill bit needed for the through-bolts. Drill each hole only halfway from one face, then flip the door and drill the other half from the opposite face so the through-bolts meet cleanly in the middle without blowout.
Where this fits
Any Centrios cylindrical install on wood or metal doors: new construction, retrofits, or replacements. Techs who install more than a few Centrios locks a month pay this tool off in labor time and eliminated re-drills.
Key features
- Locates 5/16" through-bolt holes at either 2-3/8" or 2-3/4" backset (on-tool labels for both)
- Drops into a standard cylindrical crossbore with self-centering alignment fingers
- Instructions printed on the jig: drill halfway from each face to prevent blowout
- Works on wood and metal doors across the Centrios cylindrical family
- Field-durable molded body for daily use on route
Related hardware
- Centrios Bluetooth Cylindrical Smart Lock (CEB100): the lock family this jig is prepping doors for
- Centrios Cover Plate, BSP (set of 2): covers legacy prep on retrofit installs
