You save

Jasco | JascoPro Wi-Fi Under-Eave Lights Add-on Extension Strand, 33ft, 36 RGBWW Pixels, White Cord, Compatible with 84429 | 84430

No reviews yet Write a Review
SKU:
JS-84430

The JascoPro Under-Eave Lights Add-on Extension Strand adds 33 feet and 36 more RGBWW pixels to an installed 84429 white under-eave kit. Two 16.5ft. strands, mounting brackets, tape, screws, and cord clips ship in the box. No power supply, no controller: this bundle rides on the parent kit's power supply and Wi-Fi pairing, so job walks stay short.

Chaining this add-on to the parent kit extends the show across the full front elevation on most homes — enough coverage to hit the entire eave line with Christmas scenes, Halloween orange, or Fourth-of-July color instead of just the kit's 82.5ft. run.

Built to extend an installed system

The add-on strand is not a standalone kit. It requires an already-installed 84429 (white) or 84425 (black) main kit to power and control the pixels. Chain it in-line with the main kit's strand run and the JascoPro app treats every puck as part of the same show. Total system length maxes out at 99ft. / 108 pixels per power supply.

Key features

  • Extension only: two 16.5ft. white strands (36 pixels), patent-pending brackets, tape, screws, and cord clips included. No power supply, no controller
  • RGBWW pixels with 90 CRI and 43 lumens per puck at 6500K, matched to the parent kit's color and brightness output
  • Direct-connect compatibility with JascoPro Under-Eave Light sets (84429 white or 84425 black) to extend length up to 99ft. / 108 pixels total
  • Permanent-install hardware: patent-pending fascia clips mount on eaves, fascia, pergolas, patios, and balconies
  • Cuttable end for a custom-length finish
  • Year-round outdoor rating: UV resistant, weatherproof, -4F to 131F operating range, UL and NEC compliant
  • 5-year limited replacement policy matching the parent kit

System requirements

Requires an installed JascoPro Under-Eave Light set: 84429 (white) or 84425 (black), sold separately. The add-on strand connects to the main kit's strand run and shares its power supply and Wi-Fi controller. Use 84431 (white extension cable 2-pack) to bridge gaps between the main kit and the add-on strand, or between add-on strand sections, if the runs are not adjacent.

Related products in the JascoPro under-eave family

  • Main kits (required parent): 84429 (white, 82.5ft.), 84425 (black, 82.5ft.)
  • Add-on strand, black equivalent: 84426 (same 33ft. bundle in black)
  • Extension cables (10ft. 2-pack, cord only, no lights): 84431 (white), 84427 (black)
  • Replacement power supplies: 84432 (white), 84428 (black)
Brand:
Jasco
Form factor:
Under-eave add-on extension strand, 2 x 16.5ft.
Cord color:
White
Total length:
33ft. (2 x 16.5ft. strands)
Pixel count:
36 pixels (11in. spacing)
LED type:
RGBWW
Brightness:
43 lumens per pixel at 6500K
Color rendering:
90 CRI
Power source:
Powered by parent kit (84429 white or 84425 black), no supply included
Controller:
Uses parent kit's 2.4GHz Wi-Fi controller (JascoPro app)
Compatibility:
JascoPro Under-Eave Light sets: 84429 (white) or 84425 (black), sold separately
Max system linkable length:
99ft. / 108 pixels total per power supply
Cuttable:
Yes, end of set can be trimmed
Mounting:
Patent-pending brackets with double-sided tape and screws, plus cord clips
Weather rating:
UV resistant, weatherproof, rated for permanent outdoor use
Operating temp:
-4F to 131F
Compliance:
UL, NEC compliant, FCC
Warranty:
5-year limited replacement policy
What's in the box:
2 x 16.5ft. white strands (36 pixels), mounting brackets, double-sided tape, screws, cord clips
Can this add-on strand be used on its own?
No. The 84430 is an extension for an installed JascoPro Under-Eave Light kit (84429 white or 84425 black). It has no power supply or controller of its own and cannot operate without a parent kit.
What does 84430 extend?
It extends the run of a JascoPro Wi-Fi Under-Eave Light kit by 33ft. and 36 pixels. Total system length maxes at 99ft. / 108 pixels per parent power supply.
What's the difference between 84430 and 84431?
84430 is a lit extension strand (36 RGBWW pixels on 33ft. of white cord). 84431 is a cord-only extension cable (10ft. 2-pack, no pixels) used to bridge gaps between strand sections.
Do I need a second power supply?
Not if the total system stays under 99ft. / 108 pixels. One JascoPro power supply drives the parent kit plus this add-on. If the total exceeds 99ft., run a second kit off its own outlet and power supply.
Can the add-on strand be cut to fit?
Yes. The end of the set is cuttable at a designated point on the strand for a custom fit. Cutting reduces the pixel count but does not affect the rest of the strand's functionality.
Are these rated for year-round outdoor use?
Yes. UV resistant, weatherproof, UL and NEC compliant, -4F to 131F operating range, rated for permanent outdoor installation.
What warranty does JascoPro offer?
A 5-year limited replacement policy, matching the parent kit. Register the product through the JascoPro app during setup to activate warranty coverage.
How does this help sell the seasonal-lights pitch?
Extending to 99ft. / 108 pucks wraps the full front elevation on most homes without a coverage gap. On a seasonal display (Christmas, Halloween, Fourth of July) the homeowner sees a complete, symmetrical light run instead of a partial one.