The PAM1 is a fully encapsulated, multi-voltage control relay that gives you a spare Form C contact wherever a fire alarm, security, HVAC, or lighting control circuit needs to drive an external load or feed back a status signal, without adding a full control module.
Why installers reach for it
- Works on three input voltages: the same relay accepts 24V AC, 24V DC, or 115V AC, so one part number covers most control circuits on a job.
- Red LED status indicator: lights up whenever the relay coil is energized, so you can confirm operation without a meter.
- Flexible mounting: goes up with the included double-sided adhesive tape, a self-drilling screw, or simply sits loose in a back box.
- Field-ready leads: 6-inch 18 AWG wire leads make splicing into an existing circuit quick.
Applications
Suited to HVAC, temperature control, fire alarm, security, energy management, and lighting control systems that need a remote relay for control or status feedback.
Brand:
Kidde Commercial
Form factor:
Encapsulated single SPDT relay with LED, adhesive tape and mounting screw included
Power input:
24V AC, 24V DC, or 115V AC (15 mA per position)
Contact rating:
10 Amps @ 115V AC, Form C, UL Recognized
Operating temp:
-58 F to 185 F (-50 C to 85 C)
Dimensions:
1.5 H x 1 W x 0.875 D in (38.1 x 24.5 x 22.2 mm), 6 in 18 AWG leads
Compliance:
UL Recognized components
What input voltages does the PAM1 accept?
24V AC, 24V DC, or 115V AC - the same relay works on any of the three without rewiring for a different model.
How do I mount the PAM1?
Use the included double-sided adhesive tape, the self-drilling screw, or simply place it loose inside a back box - whichever suits the enclosure.
What does the red LED indicate?
The LED lights whenever the relay coil is energized, giving a quick visual check that the relay is operating without needing a meter.
Spec Sheet
