You save

Luminys | N9 4 X 5MP Directional Camera 2.8-12 Mm Lenses, Ir Leds | N9P-20RAV

No reviews yet Write a Review
SKU:
LM-N9P-20RAV

The Luminys N9P-20RAV puts four independently adjustable 5MP sensors in a single dome housing, delivering flexible 180°, 270°, or full 360° unstitched coverage from a single mount point. LumiFlex consolidates all four sensor streams into one continuous feed, cutting your VMS license count without sacrificing scene coverage. IP67, IK10, NDAA compliant, and built for demanding commercial environments.

Built for the commercial installer

Each sensor carries a motorized 2.8-12mm vari-focal lens with full pan/tilt/rotation adjustment after install, so you dial in each channel's aim once the camera is on the ceiling. Eight IR LEDs per sensor push illumination out to 98 ft. The N9P-20RAV accepts PoE+ (802.3at) or 12 VDC, meets NDAA Section 889, and ships with ONVIF Profile S/G/T interoperability baked in.

Key features

  • LumiFlex multi-directional: four independently positionable sensors cover 180°, 270°, or 360° from a single mount - one box can replace up to four cameras and their associated VMS licenses
  • 5MP at 30fps per sensor: 1/2.7-in. Progressive CMOS, 2592x1944 per channel; consolidated stream up to 8MP
  • Motorized vari-focal per sensor: 2.8-12mm, F1.7 aperture, 0.005 Lux minimum illumination - full aiming adjustment post-install (pan 0°-360°, tilt 0°-75°, rotation 0°-355°)
  • Analytics without extra licensing: VCA+ (Line Crossing, Intrusion, Loitering, Parking Detection) and LumiAnalytics (Face Detection, People Counting, Smart Object Detection) built in
  • IP67, IK10, LumiDesertPro-rated: -22°F to 140°F operating range, vandal-resistant for interior and exterior commercial installs
  • NDAA compliant, ONVIF Profile S/G/T: integrates with any standards-compliant VMS; FCC and IC certified

System requirements

Requires PoE+ (802.3at) switch port or 12 VDC power supply (max 24.7 W). Compatible with any ONVIF Profile S/G/T VMS or NVR. Local recording via MicroSD up to 256 GB; network storage via FTP, SFTP, or NAS. Pendant, wall, corner, and ceiling mount accessories available separately.

Brand:
Luminys
Form factor:
Multi-sensor dome, four independently adjustable sensors
Image sensor:
Four (4) 1/2.7-in. 5MP Progressive CMOS
Resolution:
2592 x 1944 per sensor; consolidated stream up to 8MP
Lens:
Motorized Vari-Focal, 2.8 mm to 12.0 mm
Maximum aperture:
F1.7
Field of view:
H: 100° to 42° | V: 74° to 32° | D: 133° to 53°
IR range:
Up to 30.0 m (98.4 ft); 8x IR LEDs per sensor
Installation angle:
Pan: 0° to 360°, Tilt: 0° to 75°, Rotation: 0° to 355°
Coverage:
180°, 270°, or 360° unstitched (LumiFlex)
Compression:
H.265+, H.265, H.264+, H.264, MJPEG (sub-stream only)
Analytics:
VCA+: Line Crossing, Intrusion, Loitering, Parking Detection; LumiAnalytics: Face Detection, People Counting, Smart Object Detection
Audio:
1x input / 1x output (RCA)
Alarm I/O:
3 inputs / 2 outputs
Network interface:
RJ-45 (10/100/1000 Base-T)
Storage:
MicroSD up to 256 GB, FTP, SFTP, NAS
Power input:
12 VDC or PoE+ (802.3at)
Power consumption:
< 24.7 W
Operating temp:
-30°C to 60°C (-22°F to 140°F)
Weather rating:
IP67, IK10
Dimensions:
111.3 mm x Φ286.1 mm (4.4 in. x Φ11.3 in.)
Net weight:
2.8 kg (6.1 lb)
Compliance:
NDAA Section 889, FCC, IC, ONVIF Profile S/G/T
How does LumiFlex reduce VMS licensing costs?
LumiFlex consolidates all four sensor streams into one feed, so your VMS sees one camera instead of four. On per-channel-licensed systems, that can cut licensing costs by up to 75% vs. deploying four separate cameras.
Can each sensor be independently aimed after the camera is mounted?
Yes. Each of the four sensors adjusts independently: pan 0°-360°, tilt 0°-75°, rotation 0°-355°. Aim each channel to a specific zone after the dome is ceiling-mounted - no remounting required.
Is the N9P-20RAV NDAA Section 889 compliant?
Yes. The N9P-20RAV is NDAA Section 889 compliant, making it eligible for federal and government-adjacent projects.
What VMS or NVR platforms does this camera support?
The N9P-20RAV is ONVIF Profile S, G, and T certified and works with any standards-compliant VMS or NVR. It is also compatible natively with Luminys LumiViewer and the LumiViewer Mobile App.
What power does the N9P-20RAV require?
The camera accepts PoE+ (802.3at) or 12 VDC. Maximum draw is 24.7 W - confirm your switch or injector is rated for 802.3at (not just 802.3af) before install.
Does this camera work in extreme heat or cold?
Yes. Operating range is -30°C to 60°C (-22°F to 140°F) with LumiDesertPro rating. IP67 weatherproofing and IK10 vandal resistance cover most outdoor commercial applications.
What mounting options are available for the N9P-20RAV?
Luminys offers a full range of compatible accessories: pendant mount (LUM-A08), wall mount (LUM-W06), corner mount (LUM-C01), pole mount (LUM-P01), parapet mount (LUM-R01), and ceiling mount (LUM-E02). All sold separately.

Spec Sheet