28-Port Gigabit Easy Smart PoE+ Switch, 24 PoE+ Ports, 250 W, 2 SFP Slots
TP-Link

28-Port Gigabit Easy Smart PoE+ Switch, 24 PoE+ Ports, 250 W, 2 SFP Slots

SKU TPL-TL-SG1428PE Model TL-SG1428PE

  • Twenty-four 802.3af/at PoE+ ports sharing a 250 W budget for cameras and APs
  • Easy Smart management with up to 32 VLANs, QoS, IGMP snooping and link aggregation
  • Two Gigabit SFP ports for fiber uplinks, 56 Gbps switching capacity
  • 1U 19-inch rack mount with rackmount kit and rubber feet included
New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

Product highlights

  • Ports24 x PoE+, 2 x RJ45, 2 x SFP
  • PoE250 W, 802.3af/at
  • ConnectivityEasy Smart: web or utility
  • Mount1U 19-inch rack

The TL-SG1428PE is an Easy Smart 28-port Gigabit rackmount switch with 24 PoE+ ports and two SFP slots. It gives a larger camera or AP closet VLANs, QoS and IGMP snooping without a fully managed switch.

Built for larger camera and AP closets

Ports 1 to 24 supply 802.3af/at PoE+ from a 250 W shared budget, so size the load carefully when the ports are full of PTZs. Two Gigabit RJ45 ports and two Gigabit SFP ports handle the recorder and uplinks. VLANs separate camera traffic, port-based 802.1p/DSCP priority favors video, and PoE Auto Recovery restarts a frozen device. Setup is through the web GUI or the Easy Smart Configuration Utility.

Key features

  • 24 PoE+ ports, 250 W total: 802.3af/at for cameras, APs and IP phones
  • VLANs and QoS: up to 32 VLANs from 4K IDs, MTU, port and tag VLAN, rate limit and storm control
  • Two Gigabit SFP ports: for fiber uplinks
  • PoE Auto Recovery: restarts a frozen PoE device without a truck roll
  • 1U 19-inch rack mount: with rackmount kit and rubber feet included

System requirements

Configured from the web GUI or the Easy Smart Configuration Utility. Powered from 100-240V AC with the included power cord. Powered devices must be 802.3af or 802.3at compliant.

Specifications

SKUTPL-TL-SG1428PE
BrandTP-Link
Form factor28-port Gigabit Easy Smart rackmount PoE+ switch
CommunicationEthernet / IP
Power input100-240V AC, 50/60 Hz
Power consumption304.7 W max with 250 W of PoE load
ManagementEasy Smart
PoE802.3af PoE
PoE802.3at PoE+
Port speedGigabit
Ethernet ports26 x Gigabit RJ45 (24 PoE+)
SFP slots2 x Gigabit SFP
PoE budget250 W total
PoE featuresPoE Auto Recovery
Switching capacity56 Gbps
Packet forwarding rate41.7 Mpps
MAC address table8K
Jumbo frame9 KB
VLANsUp to 32 VLANs at once (from 4K VLAN IDs), MTU, port and tag-based VLAN
L2 featuresIGMP snooping v1/v2/v3, static link aggregation, port mirroring, cable diagnostics, loop prevention
Communication notesWeb-based GUI and Easy Smart Configuration Utility; port-based 802.1p/DSCP priority, 4 queues, rate limit, storm control
Cooling2 fans
Mounting19-inch 1U rack (rackmount kit included)
Dimensions17.3 x 8.7 x 1.7 in (440 x 220 x 44 mm)
Operating temp32°F to 122°F (0°C to 50°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceCE, FCC
Package contentsTL-SG1428PE, power cord, installation guide, rackmount kit, rubber feet

FAQs

How many PoE devices can the TL-SG1428PE power?
24 ports are PoE+, sharing a 250 W budget. That is about 10 W per port if all are used, so check each device's max draw.
Is this switch managed?
It is Easy Smart: a web GUI and utility give VLANs, QoS, IGMP snooping and link aggregation. There is no Omada controller support listed.
Can it separate cameras from the office network?
Yes. It supports up to 32 VLANs at once, with MTU, port and tag-based VLAN modes.
Does it come with rack ears?
Yes. A rackmount kit is included for a 19-inch rack, plus rubber feet.
Does it have a fan?
Yes, two. Expect fan noise in a closet.
All PoE Switches