TP-Link

10-Port Gigabit Easy Smart PoE+ Switch with 8 PoE+ Ports, 123 W, Combo SFP Slot

SKU TPL-TL-SG1210MPE Model TL-SG1210MPE

  • Eight 802.3af/at PoE+ ports sharing a 123 W budget, plus a combo SFP/RJ45 port
  • Easy Smart management with up to 32 VLANs, QoS, IGMP snooping and link aggregation
  • PoE Auto Recovery restarts a frozen camera or AP on its own, no truck roll
  • Fanless steel desktop case, set up from the web GUI or Windows utility
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • Ports9 x Gigabit, 1 combo SFP
  • PoE8 ports, 123 W, 802.3af/at
  • ConnectivityEasy Smart: web or utility
  • Size8.2 x 4.9 x 1.0 in, fanless

The TL-SG1210MPE is an Easy Smart 10-port Gigabit desktop switch with eight PoE+ ports and a 123 W budget. It adds VLANs, QoS and IGMP snooping to a small camera or AP job without the cost or complexity of a fully managed switch.

Built for small segmented jobs

Ports 1 to 8 supply 802.3af/at PoE+, and the remaining port and the combo SFP/RJ45 port handle the uplink and non-PoE devices. VLANs keep cameras on their own segment, port-based and 802.1p/DSCP priority keep video ahead of other traffic, and PoE Auto Recovery restarts a powered device that stops responding. The case is fanless and steel.

Key features

  • 8 PoE+ ports, 123 W total: 802.3af/at for cameras, APs and IP phones
  • VLANs and QoS: up to 32 VLANs from 4K IDs, MTU, port and tag VLAN, 4 priority queues
  • Combo SFP/RJ45 port: for a fiber or copper uplink
  • PoE Auto Recovery: restarts a frozen PoE device without a truck roll
  • Web GUI or Easy Smart Configuration Utility: for setup without a CLI
  • Fanless desktop design: for quiet offices and small enclosures

System requirements

Configured from the web GUI or the Easy Smart Configuration Utility, which runs on Microsoft Windows. Uses the included 53.5V DC external power adapter. Powered devices must be 802.3af or 802.3at compliant.

Specifications

SKUTPL-TL-SG1210MPE
BrandTP-Link
Form factor10-port Gigabit Easy Smart desktop PoE+ switch
CommunicationEthernet / IP
Power inputExternal adapter, 53.5V DC / 2.43A (included)
Power consumption141.54 W max at 220V with 123 W of PoE load
ManagementEasy Smart
PoE802.3af PoE
PoE802.3at PoE+
Port speedGigabit
Ethernet ports9 x Gigabit RJ45 (ports 1-8 PoE+)
SFP slots1 x Gigabit combo SFP/RJ45
PoE budget123 W total
PoE featuresPoE Auto Recovery
Switching capacity20 Gbps
Packet forwarding rate14.88 Mpps
MAC address table4K
Jumbo frame16 KB
VLANsUp to 32 VLANs at once (from 4K VLAN IDs), MTU, port and tag-based VLAN
L2 featuresIGMP snooping v1/v2/v3, static link aggregation, port mirroring, cable diagnostics, loop prevention
Communication notesWeb-based GUI and Easy Smart Configuration Utility; port-based, 802.1p and DSCP priority, 4 queues, rate limit, storm control
CoolingFanless
MountingDesktop
Dimensions8.2 x 4.9 x 1.0 in (209 x 126 x 26 mm)
Operating temp32°F to 104°F (0°C to 40°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceFCC, CE
Package contentsTL-SG1210MPE, power adapter, installation guide, rubber feet

FAQs

How many PoE devices can the TL-SG1210MPE power?
Ports 1 to 8 are PoE+, sharing a 123 W budget. Divide 123 W by each device's max draw to size the job.
Is this switch managed?
It is Easy Smart: a web GUI and Windows utility give VLANs, QoS, IGMP snooping and link aggregation. There is no CLI or Omada controller listed.
Can it separate cameras from the office network?
Yes. It supports up to 32 VLANs at once, with MTU, port and tag-based VLAN modes.
What does the combo SFP port do?
It is a 1000 Mbps combo SFP/RJ45 port, so you can use a fiber SFP module or copper for the uplink.
Is it loud?
No. It is fanless, so it is silent.