- Wireless technology Wi-Fi
Omada AX1800 Ceiling Mount Dual-Band Wi-Fi 6 Access Point, 802.3at PoE, 12V DC, MU-MIMO
SKU TPL-EAP610 Model EAP610
- AX1800 dual-band Wi-Fi 6 with OFDMA and MU-MIMO for 250+ concurrent clients
- Powers from 802.3at PoE, 48V passive PoE or the 12V DC adapter in the box
- Ceiling and wall mounting kits included; junction box mounting supported
- Managed in Omada with the Cloud-Based, hardware or Software Controller
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- ConnectivityAX1800 Wi-Fi 6
- Ports1 x Gigabit RJ45
- PoE802.3at PoE or 12V DC
- Range1250 sq ft, 250+ clients
- MountCeiling or wall, kits included
The Omada EAP610 is an AX1800 Wi-Fi 6 ceiling access point for offices, shops and apartments where one AP has to serve a lot of phones and laptops at once. It runs off 802.3at PoE, 48V passive PoE or the 12V adapter in the box.
Built for the network installer
Dual-band Wi-Fi 6 with OFDMA and MU-MIMO delivers up to 1201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz, and TP-Link rates it for 250+ concurrent clients over 1250 sq ft. Ceiling and wall mounting kits come in the box, and the AP adopts into an Omada site so channels, power and SSIDs are managed centrally.
Key features
- AX1800 dual-band Wi-Fi 6: OFDMA, MU-MIMO, 1024-QAM and beamforming for dense client loads
- Three ways to power it: 802.3at PoE, 48V passive PoE or the 12V DC adapter in the box
- Mounting kits included: ceiling and wall, with junction box mounting supported
- Zero-touch provisioning: pre-stage the site in the Omada Cloud-Based Controller and the AP configures itself on power-up
- Up to 16 SSIDs with WPA3: VLAN-mapped staff, guest and IoT networks
System requirements
Mesh, roaming, captive portal and zero-touch provisioning require an Omada controller: the Omada Cloud-Based Controller, an Omada Hardware Controller (OC200 or OC300) or the Omada Software Controller. Wi-Fi 6 features depend on client support.
Specifications
| SKU | TPL-EAP610 |
|---|---|
| Brand | TP-Link |
| Form factor | Ceiling-mount dual-band Wi-Fi 6 access point |
| Communication | Ethernet / IP |
| Power input | 802.3at PoE, 48V passive PoE or 12V/1A DC (adapter included) |
| Power consumption | 11.0 W max (PoE); 9.9 W max (DC) |
| Wi-Fi standard | Wi-Fi 6 |
| PoE | 802.3at PoE+ |
| PoE | Passive PoE |
| Port speed | Gigabit |
| Works with | Omada |
| Ethernet ports | 1 x Gigabit RJ45 |
| Wireless standards | IEEE 802.11ax/ac/n/g/b/a |
| Wireless speed | Up to 1201 Mbps on 5 GHz, up to 574 Mbps on 2.4 GHz |
| Concurrent clients | 250+ |
| Coverage | 1250 sq ft |
| Antennas | Internal omni: 2 x 4 dBi (2.4 GHz), 2 x 5 dBi (5 GHz) |
| SSIDs | Up to 16 (8 per band) |
| Wireless security | WPA3, WPA2 and WPA Personal/Enterprise, captive portal, 802.1X, MAC filtering, client isolation, SSID to VLAN mapping, rogue AP detection |
| Controller management | Omada Cloud-Based Controller, Omada Hardware Controller (OC200, OC300) or Omada Software Controller; Omada app |
| Communication notes | SNMP v1/v2c/v3, SSH, HTTP/HTTPS, local/remote syslog, L3 and multi-site management, management VLAN, zero-touch provisioning via the Cloud-Based Controller |
| Mounting | Ceiling or wall (kits included); junction box |
| Dimensions | 6.3 x 6.3 x 1.3 in (160 x 160 x 33.6 mm), V2 and above |
| Operating temp | 32°F to 104°F (0°C to 40°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | CE, FCC |
| Package contents | EAP610, power adapter, ceiling/wall mounting kits, installation guide |
