• SS&Si
  • Series
  • Omada
  • TP-Link | Omada 16-Port 10G SFP+ L2+ Managed Aggregation Switch, Dual Internal Power Supplies with 5-Year Omada Device Support | SX3016F-S5
Omada 16-Port 10G SFP+ L2+ Managed Aggregation Switch, Dual Internal Power Supplies with 5-Year Omada Device Support
TP-Link

Omada 16-Port 10G SFP+ L2+ Managed Aggregation Switch, Dual Internal Power Supplies with 5-Year Omada Device Support

SKU TPL-SX3016F-S5 Model SX3016F-S5

  • 16 SFP+ slots at 10G with 320 Gbps of switching capacity for uplinks
  • Two internal fixed power supplies in a 1+1 redundant arrangement
  • L2+ static routing, DHCP server, VLANs, ACLs and ERPS ring recovery
  • Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
Also available as
1-year support 3-year support 5-year support Hardware only
New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

Product highlights

  • Ports16 x 10G SFP+
  • ConnectivityL2+ managed, cloud or standalone
  • Power1+1 redundant, internal
  • Mount19-inch rack
  • Size17.3 x 8.7 x 1.7 in

This SKU is the SX3016F bundled with 5 years of Omada Device Support from TP-Link. The hardware is identical to the standalone SX3016F.

The Omada SX3016F is a 16-port 10G SFP+ L2+ managed aggregation switch with 320 Gbps of switching capacity and two internal power supplies backing each other up. It ties access and PoE switches together over fiber or DAC and is managed in the same Omada site as the gateway and APs.

Built for 10G aggregation that stays up

All sixteen slots are 10G SFP+, enough to uplink a rack of access switches and still leave ports for servers or the core. The 1+1 redundant power supplies are internal and fixed, and ERPS ring recovery covers fiber ring topologies. Static routing, a DHCP server, VLANs and ACLs handle the Layer 2 and light Layer 3 work.

Key features

  • Sixteen 10G SFP+ slots: 320 Gbps of switching capacity and 238.08 Mpps forwarding
  • 1+1 redundant power supplies: internal and fixed, so one can fail without taking the switch down
  • L2+ routing: 48 IPv4/IPv6 static routes and a DHCP server and relay
  • ERPS ring recovery: rapid protection and recovery in a ring topology
  • Zero-touch provisioning: and batch firmware upgrades through the Omada Cloud-Based Controller
  • Rack mount: rackmount kit included, with a physical security lock

System requirements

Centralized management needs an Omada Cloud-Based Controller (built-in 5.15.22 or later), Hardware Controller or Software Controller (built-in 5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its web interface, CLI and SNMP. The SFP+ slots need separate modules or DACs. TP-Link recommends no more than four 10G RJ45 SFP+ modules (SM5310-T), one per group of SFP+ slots.

Specifications

SKUTPL-SX3016F-S5
BrandTP-Link
Form factor16-port 10G SFP+ L2+ managed aggregation switch, rack mount
Support plan5-year Omada Device Support (included)
CommunicationEthernet / IP
Power input1+1 redundant internal fixed power supplies, 100-240V AC, 50/60 Hz
Power consumption32.7 W max at 110V (32.3 W at 220V)
ManagementL2+ Managed
Port speed10G
Works withOmada
SFP slots16 x 10G SFP+
Console ports1 x RJ45, 1 x Micro-USB
Switching capacity320 Gbps
Packet forwarding rate238.08 Mpps
MAC address table32K
Jumbo frame9 KB
VLANs4K 802.1Q VLANs, MAC, protocol, private and voice VLAN, GVRP, QinQ (port-based and selective)
L2+ features48 IPv4/IPv6 static routes, DHCP server and relay, link aggregation, STP, ERPS, loopback detection, IGMP and MLD snooping
Security802.1X with RADIUS, AAA with TACACS+, ACLs (MAC, IP, time-based), DHCP snooping, ARP inspection, port security, storm control, DoS defend, HTTPS and SSH management
Controller managementOmada Cloud-Based Controller (built-in 5.15.22 or later); Hardware and Software Controller (built-in 5.15.20 or later); Omada app
Communication notesWeb GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, sFlow, IPv6, dual image and dual configuration
Cooling1 fan
Mounting19-inch rack (rackmount kit included), physical security lock
Dimensions17.3 x 8.7 x 1.7 in (440 x 220 x 44 mm)
Operating temp23°F to 113°F (-5°C to 45°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceCE, FCC
Package contentsSX3016F, power cords, console cable, rackmount kit, rubber feet, quick installation guide

Documents and resources

FAQs

Does the SX3016F have copper ports?
No. It has sixteen 10G SFP+ slots and console ports only. Use SFP+ optics or DACs. TP-Link recommends at most four 10G RJ45 SFP+ modules (SM5310-T).
Does it need an Omada controller?
No. It runs standalone from its web interface, CLI and SNMP. A controller adds centralized management, and the cloud controller adds zero-touch provisioning.
Can it route between VLANs?
Yes. It is L2+ with 48 IPv4/IPv6 static routes and a DHCP server, so it can route between a handful of VLANs.
Can I swap a failed power supply?
No. The two power supplies are internal and fixed. They run 1+1 redundant, so either can carry the switch if the other fails.
Does it come with rack ears?
Yes. A rackmount kit is included for a 19-inch rack, along with rubber feet.
All Omada