Omada 32-Port 10G SFP+ L2+ Managed Aggregation Switch, Dual Internal Power Supplies with 5-Year Omada Device Support
SKU TPL-SX3032F-S5 Model SX3032F-S5
- 32 SFP+ slots at 1/10G with 640 Gbps of switching capacity and 240 Mpps
- Two internal fixed power supplies in a 1+1 redundant arrangement
- L2+ static routing, DHCP server, VLANs, ACLs and ERPS ring recovery
- Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports32 x 1/10G SFP+
- ConnectivityL2+ managed, cloud or standalone
- Power1+1 redundant, internal
- Mount19-inch rack
- Size17.3 x 13.0 x 1.7 in
This SKU is the SX3032F bundled with 5 years of Omada Device Support from TP-Link. The hardware is identical to the standalone SX3032F.
The Omada SX3032F is a 32-port 1/10G SFP+ L2+ managed aggregation switch with 640 Gbps of switching capacity and two internal power supplies backing each other up. It handles fiber aggregation for a large site and is managed in the same Omada site as the gateway and APs.
Built for high-density fiber aggregation
Thirty-two SFP+ slots run at 1/10G, so older 1G fiber links and new 10G links can share one switch. The 1+1 redundant power supplies are internal and fixed, and ERPS ring recovery covers fiber ring topologies. Static routing, a DHCP server, VLANs and ACLs handle the Layer 2 and light Layer 3 work.
Key features
- Thirty-two 1/10G SFP+ slots: 640 Gbps of switching capacity and 240 Mpps forwarding
- 1+1 redundant power supplies: internal and fixed, so one can fail without taking the switch down
- L2+ routing: 48 IPv4/IPv6 static routes and a DHCP server and relay
- ERPS ring recovery: rapid protection and recovery in a ring topology
- Zero-touch provisioning: and batch firmware upgrades through the Omada Cloud-Based Controller
- Rack mount: rackmount kit included, with a physical security lock
System requirements
Centralized management needs an Omada Cloud-Based Controller (built-in 5.15.22 or later), Hardware Controller or Software Controller (built-in 5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its web interface, CLI and SNMP. The SFP+ slots need separate modules or DACs. TP-Link recommends no more than eight 10G RJ45 SFP+ modules (SM5310-T), one per two sets of SFP+ slots.
Specifications
| SKU | TPL-SX3032F-S5 |
|---|---|
| Brand | TP-Link |
| Form factor | 32-port 1/10G SFP+ L2+ managed aggregation switch, rack mount |
| Support plan | 5-year Omada Device Support (included) |
| Communication | Ethernet / IP |
| Power input | 1+1 redundant internal fixed power supplies, 100-240V AC, 50/60 Hz |
| Power consumption | 49.4 W max at 220V |
| Management | L2+ Managed |
| Port speed | Gigabit |
| Port speed | 10G |
| Works with | Omada |
| SFP slots | 32 x 1/10G SFP+ |
| Console ports | 1 x RJ45, 1 x Micro-USB |
| Switching capacity | 640 Gbps |
| Packet forwarding rate | 240 Mpps |
| MAC address table | 32K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLANs, MAC, protocol and voice VLAN, GVRP, VLAN mapping and replace |
| L2+ features | 48 IPv4/IPv6 static routes, DHCP server and relay, link aggregation, STP, ERPS, loopback detection, IGMP and MLD snooping |
| Security | 802.1X with RADIUS, AAA with TACACS+, ACLs (MAC, IP, time-based), DHCP snooping, ARP inspection, port security, storm control, DoS defend, HTTPS and SSH management |
| Controller management | Omada Cloud-Based Controller (built-in 5.15.22 or later); Hardware and Software Controller (built-in 5.15.20 or later); Omada app |
| Communication notes | Web GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, sFlow, IPv6, dual image and dual configuration |
| Cooling | 2 fans |
| Mounting | 19-inch rack (rackmount kit included), physical security lock |
| Dimensions | 17.3 x 13.0 x 1.7 in (440 x 330 x 44 mm) |
| Operating temp | 23°F to 113°F (-5°C to 45°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | CE, FCC |
| Package contents | SX3032F, power cords, console cable, rackmount kit, rubber feet, quick installation guide |
