Omada 1000BASE-T RJ45 SFP Copper Transceiver Module, Plug and Play, 100 m on Cat 5e or Above
SKU TPL-SM331T Model SM331T
- Adds a 1000BASE-T RJ45 port to any Gigabit SFP slot for copper-only devices
- Reaches 100 m over Cat 5e or better twisted-pair cable at Gigabit speed
- Hot-swappable, with TX Disable support, so it installs in a live host
- Compact SFP footprint with a 32°F to 158°F (0°C to 70°C) operating range
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- RangeUp to 100 m
- Connectivity1000BASE-T RJ45
- Ports1x RJ45 in an SFP slot
The Omada SM331T turns a Gigabit SFP slot into a 1000BASE-T RJ45 port. It is the answer when a switch or gateway has a spare SFP cage and the device you need to connect only speaks copper.
Built for copper in an SFP slot
The module reaches 100 m over Cat 5e or better cable at a 1.25 Gbps line rate. It is hot-swappable, so it goes into a live host, and it follows the SFP MSA footprint. It is rated from 32°F to 158°F.
Key features
- RJ45 in an SFP slot: 1000BASE-T up to 100 m on Cat 5e or better
- Hot-swappable: install or replace with the host running
- Low draw: 0.5 W typical from the host slot
- SFP MSA footprint for compatibility with SFP-equipped hosts
System requirements
A Gigabit SFP slot on a switch, gateway or router, and Cat 5e or better twisted-pair cable up to 100 m to the connected device.
Specifications
| SKU | TPL-SM331T |
|---|---|
| Brand | TP-Link |
| Form factor | Gigabit RJ45 copper SFP transceiver module |
| Communication | Ethernet / IP |
| Power input | 3.3V from the host SFP slot |
| Power consumption | 0.5 W typical, 0.8 W max |
| Port speed | Gigabit |
| Standard | 1000BASE-T, IEEE 802.3, 802.3ab, 802.3x, SFF-8472 |
| Connector type | RJ45 |
| Max distance | 100 m (Cat 5e or above) |
| Data rate | 1.25 Gbps |
| Compatibility notes | SFP MSA footprint; fits Gigabit SFP slots |
| Hardware features | Hot-swappable, TX Disable |
| Dimensions | 2.7 x 0.5 x 0.5 in (67.4 x 13.4 x 13.8 mm) |
| Operating temp | 32°F to 158°F (0°C to 70°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | SM331T, installation guide |
Documents and resources
FAQs
How far can the SM331T run?
Up to 100 m over Cat 5e or better cable.
Is it a fiber module?
No. It is a copper 1000BASE-T module with an RJ45 jack. Fiber runs need an SFP such as the SM311LM.
Can I swap it without powering down?
Yes. The SM331T is hot-swappable.
What power does it need?
3.3V, drawn from the host SFP slot. Typical power draw is 0.5 W, 0.8 W max.
