Omada 10GBASE-T RJ45 SFP+ Copper Module, Multi-Rate 1G/2.5G/5G/10G, 30 m on Cat6a, DDM
SKU TPL-SM5310-T Model SM5310-T
- Adds a 10G RJ45 port to any SFP+ slot, up to 30 m on Cat6a or above
- Multi-rate 10G, 5G, 2.5G and 1G, up to 100 m on Cat5e at lower speeds
- Hot-pluggable, with DDM for temperature and voltage monitoring
- SFP+ MSA compliant, fully metallic enclosure, 2.442 W maximum draw
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Range30 m on Cat6a at 10G
- Connectivity10GBASE-T RJ45
- Ports1x 10G RJ45
The Omada SM5310-T turns an SFP+ slot into a 10G RJ45 port. It runs 10GBASE-T up to 30 m on Cat6a or better, so a 10G copper device can connect to a switch or gateway that only has SFP+ cages.
Built for copper links on SFP+ ports
The module is multi-rate: 10GBASE-T, 5GBASE-T, 2.5GBASE-T and 1000BASE-T, with Cat5e or better good for up to 100 m at the lower speeds. It is hot-pluggable, follows the SFP+ MSA and supports DDM for temperature and voltage per SFF-8472. TP-Link notes that running it at 1 Gbps may need extra port data rate configuration.
Key features
- 10 Gbps over copper: up to 30 m on Cat6a or above
- Multi-rate: 10G, 5G, 2.5G and 1G, up to 100 m on Cat5e or above at the lower speeds
- Hot-pluggable SFP+ footprint
- DDM support for temperature and voltage
- Metal enclosure for low EMI
System requirements
An SFP+ slot on a switch, gateway or other SFP+ equipment, and UTP cabling: Cat6a or above for 10G, Cat5e or above for 1G, 2.5G and 5G.
Specifications
| SKU | TPL-SM5310-T |
|---|---|
| Brand | TP-Link |
| Form factor | 10G RJ45 SFP+ transceiver module |
| Communication | Ethernet / IP |
| Power input | 3.3V |
| Power consumption | 2.442 W max at 10 Gbps full duplex |
| Port speed | 10G |
| Port speed | 2.5G |
| Port speed | Gigabit |
| Standard | IEEE 802.3, 802.3ab, 802.3an, 802.3bz, 802.3x; SFF-8431, SFF-8472 |
| Connector type | RJ45 |
| Max distance | 10GBASE-T: 30 m on Cat6a; 1G/2.5G/5G: 100 m on Cat5e |
| Data rate | 10.3125 Gbps (1G, 2.5G, 5G and 10G supported) |
| Cable type | UTP Cat6a or above for 10G; Cat5e or above for 1G, 2.5G and 5G |
| Compatibility notes | SFP+ MSA compliant; 1 Gbps use may need extra port rate configuration |
| Hardware features | DDM (temperature and voltage), hot-swappable, TX disable |
| Dimensions | 2.7 x 0.5 x 0.5 in (67.4 x 13.4 x 13.8 mm) |
| Operating temp | 32°F to 158°F (0°C to 70°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE, RoHS |
| Package contents | SM5310-T module, installation guide |
Documents and resources
FAQs
How far can the SM5310-T run at 10G?
Up to 30 m on UTP Cat6a or above. At 1G, 2.5G or 5G it reaches 100 m on Cat5e or above.
What speeds does it support?
10GBASE-T, 5GBASE-T, 2.5GBASE-T and 1000BASE-T.
Any setup needed at 1 Gbps?
TP-Link notes that extra configuration for the port data rate may be required when it is used at 1 Gbps.
What does it draw?
A maximum of 2.442 W at 10 Gbps full duplex, from the 3.3V SFP+ slot.
