Omada 10G PoE++ Injector, 802.3bt/at/af, 90 W, 1 PoE Port, Metal Case
SKU TPL-POE380S Model POE380S
- 10G PoE++ injector delivering up to 90 W to 802.3af/at/bt powered devices
- Two RJ45 ports that negotiate 10 Mbps up to 10 Gbps, data in and power out
- Metal casing and a built-in 100-240 V AC supply with the power cord included
- Desktop or wall mount; TP-Link says it is not for passive PoE devices
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports2 x 10G RJ45
- PoE802.3af/at/bt, 90 W max
- PowerBuilt-in 100-240 V AC supply
- MountDesktop or wall, metal case
The POE380S is a 10G PoE++ injector that delivers up to 90 W, so the heaviest PTZ cameras and access points can run off a non-PoE multigig link.
Built for 90 W PoE++ and 10G uplinks
It takes data in on one RJ45 and sends data plus power out the other, auto-sensing 802.3af, 802.3at or 802.3bt devices up to 90 W (Type 4). Both ports negotiate 10M to 10G. The case is metal, the supply is built in, and it mounts on a wall or sits on a desk. TP-Link notes it is not compatible with passive PoE.
Key features
- Up to 90 W: 802.3af/at/bt (Type 4) for PTZ cameras, APs and LED fixtures
- 10G RJ45 ports: 10M, 100M, 1G, 2.5G, 5G and 10G auto-negotiation
- Metal casing with a built-in 100-240 V AC supply
- Desktop or wall mount: 102 mm hole spacing
- Plug and play: no configuration
System requirements
100-240 V AC power (cord included), a data source on the Data In port, and a standards-based 802.3af/at/bt powered device. Use Cat 6 or better for 10G. Not for passive PoE devices.
Specifications
| SKU | TPL-POE380S |
|---|---|
| Brand | TP-Link |
| Form factor | 10G 802.3af/at/bt PoE++ injector, metal case |
| Communication | Ethernet / IP |
| Power input | 100-240 V AC, 50/60 Hz, 1.6 A (integrated supply, power cord included) |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| PoE | 802.3bt PoE++ |
| Port speed | Gigabit |
| Port speed | 2.5G |
| Port speed | 10G |
| Ethernet ports | 2 x 10G/5G/2.5G/1G/100M/10M RJ45 (1 Data In, 1 Power+Data Out) |
| PoE output | 90 W max |
| PoE features | Auto-sensing 802.3af/at/bt (Type 4), auto-determines power requirement |
| Communication notes | 10GBASE-T: Cat 6 or above to 50 m, STP to 90 m; 5GBASE-T and 2.5GBASE-T: Cat 5e or above to 100 m |
| Compatibility notes | Not compatible with passive PoE or other non-standard PoE devices |
| Mounting | Desktop or wall; hole spacing 4.02 in (102 mm) |
| Dimensions | 6.1 x 2.8 x 1.7 in (155 x 70 x 42 mm) |
| Operating temp | 32°F to 113°F (0°C to 45°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | POE380S, power cord, installation guide |
Documents and resources
FAQs
How much power can the POE380S deliver?
Up to 90 W (802.3bt Type 4), auto-determined from what the powered device needs.
Which PoE standards does it support?
IEEE 802.3af, 802.3at and 802.3bt.
How far can a 10G link run?
Cat 6 or better to 50 m, or shielded cable to 90 m. 5G and 2.5G reach 100 m on Cat 5e.
Will it power passive PoE gear?
No. TP-Link states it is incompatible with passive PoE and other non-standard PoE devices.
