Omada Gigabit PoE++ Injector, 802.3bt/at/af, 60 W, 1 PoE Port, Metal Case
SKU TPL-POE170S Model POE170S
- Gigabit PoE++ injector delivering up to 60 W to 802.3af/at/bt powered devices
- Metal casing and a built-in 100-240 V AC supply with the power cord included
- Desktop or wall mount, with an RJ45 patch cable included in the box
- Auto-sensing output; TP-Link says it is not for passive PoE devices
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports2 x Gigabit RJ45
- PoE802.3af/at/bt, 60 W max
- PowerBuilt-in 100-240 V AC supply
- MountDesktop or wall, metal case
The POE170S is a Gigabit PoE++ injector that delivers up to 60 W, so a PTZ camera or a power-hungry access point can run off a non-PoE switch without a separate power run.
Built for PTZ cameras and high-draw APs
It takes Gigabit data in and sends data plus power out the second port, auto-sensing 802.3af, 802.3at or 802.3bt (Type 3) devices up to 60 W. The case is metal, the supply is built in, and it mounts on a wall or sits on a shelf. TP-Link notes it is not compatible with passive PoE devices.
Key features
- Up to 60 W: 802.3af/at/bt (Type 3) for PTZ cameras, APs and LED fixtures
- Metal casing: sturdier than the plastic pocket injectors
- Built-in AC supply: 100-240 V, power cord included
- Desktop or wall mount: 102 mm hole spacing
- RJ45 patch cable included for the powered-device side
System requirements
100-240 V AC power (cord included), a Gigabit data source on the Data In port, and a standards-based 802.3af/at/bt powered device. Not for passive PoE devices.
Specifications
| SKU | TPL-POE170S |
|---|---|
| Brand | TP-Link |
| Form factor | Gigabit 802.3af/at/bt PoE++ injector, metal case |
| Communication | Ethernet / IP |
| Power input | 100-240 V AC, 50/60 Hz, 1.6 A (integrated supply, power cord included) |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| PoE | 802.3bt PoE++ |
| Port speed | Gigabit |
| Ethernet ports | 2 x 10/100/1000 Mbps RJ45 (1 Data In, 1 Power+Data Out) |
| PoE output | 60 W max |
| PoE features | Auto-sensing 802.3af/at/bt (Type 3), auto-determines power requirement |
| Communication notes | IEEE 802.3i, 802.3u, 802.3ab, 802.3af, 802.3at, 802.3bt; up to 100 m |
| Compatibility notes | Not compatible with passive PoE or other non-standard PoE devices |
| Mounting | Desktop or wall; hole spacing 4.02 in (102 mm) |
| Dimensions | 6.1 x 2.8 x 1.7 in (155 x 70 x 42 mm) |
| Operating temp | 32°F to 113°F (0°C to 45°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | POE170S, installation guide, power cord, RJ45 cable |
Documents and resources
FAQs
How much power can the POE170S deliver?
Up to 60 W on the Power+Data Out port, auto-determined from what the powered device needs.
Which PoE standards does it support?
IEEE 802.3af, 802.3at and 802.3bt (Type 3).
Will it power passive PoE gear?
No. TP-Link states it is incompatible with passive PoE and other non-standard PoE devices.
Is the power supply external?
No. It is integrated; use the included power cord.
