Omada 10GBASE-LR SFP+ Transceiver, Single-Mode, LC Duplex, 1310 nm, 10 km
SKU TPL-SM5110-LR Model SM5110-LR
- 10GBASE-LR optics at 1310 nm, up to 10 km on single-mode fiber
- LC duplex connector for 9/125 µm single-mode fiber runs of up to 10 km
- Hot-swappable, with Digital Diagnostic Monitoring for the optical link
- SFP+ MSA compliant, fits 10G SFP+ slots, rated 32°F to 158°F (0°C to 70°C)
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- RangeUp to 10 km
- Connectivity10GBASE-LR, 1310 nm
- PortsLC duplex, single-mode
The Omada SM5110-LR is a 10GBASE-LR SFP+ transceiver for single-mode fiber, reaching 10 km at 10 Gbps. It is the module for 10G uplinks between buildings or between distant closets when multi-mode will not go the distance.
Built for long 10G runs
The module runs at 1310 nm over 9/125 µm single-mode fiber with an LC duplex connector. It is hot-swappable, Digital Diagnostic Monitoring reports the optical link back to the host, and it complies with SFP+ MSA and IEEE 802.3ae. It is rated from 32°F to 158°F.
Key features
- Up to 10 km on single-mode fiber at 10 Gbps
- LC duplex, 1310 nm 10GBASE-LR optics
- Hot-swappable: install or replace with the host running
- DDM support for monitoring the optical link
System requirements
A 10G SFP+ slot on a switch or router, and 9/125 µm single-mode fiber with LC connectors. Use a matching 10GBASE-LR module at the other end of the link.
Specifications
| SKU | TPL-SM5110-LR |
|---|---|
| Brand | TP-Link |
| Form factor | 10G SFP+ transceiver module |
| Communication | Ethernet / IP |
| Power input | 3.3V from the host SFP+ slot |
| Port speed | 10G |
| Standard | 10GBASE-LR, IEEE 802.3ae |
| Connector type | LC duplex |
| Fiber type | 9/125 µm single-mode |
| Wavelength | 1310 nm |
| Max distance | 10 km |
| Data rate | 10 Gbps |
| Compatibility notes | SFP+ MSA compliant; fits 10G SFP+ slots |
| Hardware features | DDM, hot-swappable |
| Dimensions | 2.7 x 0.5 x 0.5 in (67.4 x 13.4 x 13.8 mm) |
| Operating temp | 32°F to 158°F (0°C to 70°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | SM5110-LR, installation guide |
Documents and resources
FAQs
How far can the SM5110-LR run?
Up to 10 km over 9/125 µm single-mode fiber at 10 Gbps.
Does it work with multimode fiber?
No. It is a single-mode 10GBASE-LR module. Multimode runs need a 10GBASE-SR module such as the SM5110-SR.
Do I need the same module on both ends?
Use a matching 10GBASE-LR single-mode module at the far end so wavelength and fiber type line up.
Will it fit a Gigabit SFP slot?
No. It is an SFP+ module for 10G SFP+ slots.
