Omada 18-Port Gigabit Unmanaged Rackmount PoE+ Switch, 16 PoE+ Ports, 2 SFP Combo, 250 W
SKU TPL-DS1018GMP Model DS1018GMP
- Sixteen 802.3af/at PoE+ ports at up to 30 W each from a 250 W budget
- Two Gigabit combo SFP/RJ45 slots for fiber or copper uplinks
- Extend, priority and isolation modes plus PoE auto recovery on all 16 ports
- Unmanaged 1U rackmount: plug and play, no configuration, no controller
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports16 x Gigabit PoE+, 2 combo SFP
- PoE250 W, 802.3af/at
- Mount1U rack, kit included
- RangeExtend mode to 250 m
The DS1018GMP is an unmanaged 18-port Gigabit rackmount switch with 16 PoE+ ports and a 250 W budget, a plug-and-play way to power a mid-size camera or AP deployment from a single 1U box. Two combo SFP/RJ45 slots handle the uplink.
Built for camera racks that do not need management
Ports 1 to 16 deliver 802.3af/at PoE+ at up to 30 W each. Extend mode on ports 1 to 4 pushes PoE and data out to 250 m at reduced speed, priority mode protects ports 1 to 4 for video traffic, isolation mode separates clients on ports 1-8 and 9-16, and PoE auto recovery restarts a powered device that stops responding. Two fans cool the case.
Key features
- 16 PoE+ ports, 250 W total: 802.3af/at for cameras, APs and IP phones
- 2 combo SFP/RJ45 slots: fiber or copper uplinks at Gigabit
- Extend mode to 250 m on ports 1-4 for long camera runs
- Priority and isolation modes: one-click traffic control without a configuration screen
- 1U rack kit included: mounts in a standard 19-inch rack
System requirements
None. Standard power cord included. Powered devices must be 802.3af or 802.3at compliant.
Specifications
| SKU | TPL-DS1018GMP |
|---|---|
| Brand | TP-Link |
| Form factor | 18-port Gigabit unmanaged rackmount PoE+ switch with combo SFP |
| Communication | Ethernet / IP |
| Power input | 100-240 V AC, 50/60 Hz (power cord included) |
| Power consumption | 293.34 W max with 250 W of PoE load, 19 W with no PD |
| Management | Unmanaged |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| Port speed | Gigabit |
| Ethernet ports | 16 x 10/100/1000 Mbps PoE+ RJ45 (ports 1-16) |
| SFP slots | 2 x Gigabit combo SFP/RJ45 |
| PoE budget | 250 W total, up to 30 W per port |
| PoE features | Extend mode to 250 m on ports 1-4, priority mode on ports 1-4, isolation mode on ports 1-8 and 9-16, PoE auto recovery on ports 1-16 |
| Switching capacity | 36 Gbps |
| Packet forwarding rate | 26.78 Mpps |
| MAC address table | 8K |
| Jumbo frame | 10 KB |
| Controller management | Not supported. Omada unmanaged switches do not support Omada SDN central management. |
| Communication notes | 802.1p/DSCP QoS, 802.3x flow control, MAC auto-learning and auto-aging, 1000BASE-X on SFP (MMF, SMF) |
| Cooling | 2 fans |
| Security | Physical security lock slot |
| Mounting | 1U 19-inch rack (kit included) or desktop (rubber feet included) |
| Dimensions | 17.3 x 7.1 x 1.73 in (440 x 180 x 44 mm) |
| Operating temp | 32°F to 122°F (0°C to 50°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | CE, FCC, RoHS |
| Package contents | DS1018GMP, installation guide, power cord, rackmount kit, rubber feet |
Documents and resources
FAQs
How many ports on the DS1018GMP have PoE?
Sixteen. Ports 1 to 16 are 802.3af/at PoE+ up to 30 W each, sharing a 250 W budget. The two combo SFP/RJ45 slots are data only.
Can it reach a camera more than 100 m away?
Yes. Extend mode on ports 1 to 4 carries PoE and data up to 250 m, and the port speed drops to 10 Mbps.
What do priority and isolation modes do?
Priority mode on ports 1-4 protects sensitive traffic such as video. Isolation mode separates clients on ports 1-8 and 9-16.
Is the switch loud?
It has two fans, so it is not silent. Plan for a rack or closet rather than a quiet desk.
Does this switch need to be configured?
No. It is unmanaged and works out of the box. There is no web interface or VLAN support.
