TP-Link

Omada 10-Port Gigabit Unmanaged Desktop PoE+ Switch with 8 PoE+ Ports and SFP Combo, 123 W

SKU TPL-DS110GMP Model DS110GMP

  • Eight 802.3af/at PoE+ ports at up to 30 W each from a 123 W budget
  • Nine Gigabit RJ45 ports plus a 1000 Mbps combo SFP/RJ45 port for a fiber uplink
  • Extend, priority, isolation and PoE auto recovery modes set with a switch toggle
  • Unmanaged and fanless, plug and play with nothing to configure
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • Ports9 x Gigabit + combo SFP
  • PoE123 W, 802.3af/at
  • RangeExtend mode to 250 m
  • Size8.2 x 4.9 x 1.0 in, fanless

The DS110GMP is an unmanaged 10-port Gigabit desktop switch with eight PoE+ ports and a 123 W budget, enough to power a small camera system or a mix of APs and phones from one box. It adds a combo SFP/RJ45 port for a fiber or copper uplink.

Built for mid-size camera and AP jobs without management

Ports 1 to 8 deliver 802.3af/at PoE+ at up to 30 W each. Extend mode on ports 1 to 4 pushes PoE and data out to 250 m at reduced speed, priority mode protects ports 1 and 2, isolation mode separates clients on ports 1-4 and 5-8, and PoE auto recovery restarts a powered device that stops responding. The case is fanless with a security lock slot.

Key features

  • 8 PoE+ ports, 123 W total: 802.3af/at for cameras, APs and IP phones
  • Combo SFP/RJ45 uplink: fiber or copper at 1000 Mbps
  • Extend mode to 250 m on ports 1-4 for long camera runs
  • Priority and isolation modes: one-click traffic control without a configuration screen
  • Fanless, wall mountable: quiet in offices and small racks

System requirements

None. Uses the included 53.5 V DC external power adapter. Powered devices must be 802.3af or 802.3at compliant.

Specifications

SKUTPL-DS110GMP
BrandTP-Link
Form factor10-port Gigabit unmanaged desktop PoE+ switch with combo SFP
CommunicationEthernet / IP
Power inputExternal adapter, 53.5 V DC / 2.43 A (included)
Power consumption141.40 W max with 123 W of PoE load
ManagementUnmanaged
PoE802.3af PoE
PoE802.3at PoE+
Port speedGigabit
Ethernet ports9 x 10/100/1000 Mbps RJ45 (ports 1-8 PoE+)
SFP slots1 x 1000 Mbps combo SFP/RJ45
PoE budget123 W total, up to 30 W per port
PoE featuresExtend mode to 250 m on ports 1-4, priority mode on ports 1-2, isolation mode on ports 1-4 and 5-8, PoE auto recovery on ports 1-8
Switching capacity20 Gbps
Packet forwarding rate14.88 Mpps
MAC address table4K
Jumbo frame16 KB
Controller managementNot supported. Omada unmanaged switches do not support Omada SDN central management.
Communication notes802.3x flow control (backpressure in half duplex), MAC auto-learning and auto-aging, auto MDI/MDIX
CoolingFanless
SecurityPhysical security lock slot
MountingDesktop or wall mount
Dimensions8.2 x 4.9 x 1.0 in (209 x 126 x 26 mm)
Operating temp32°F to 104°F (0°C to 40°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceFCC, CE
Package contentsDS110GMP, power adapter, installation guide, rubber feet

Documents and resources

FAQs

How many ports on the DS110GMP have PoE?
Eight. Ports 1 to 8 are 802.3af/at PoE+ up to 30 W each, sharing a 123 W budget. The remaining RJ45 port and combo port are data only.
Can it reach a camera more than 100 m away?
Yes. Extend mode on ports 1 to 4 carries PoE and data up to 250 m, and the port speed drops to 10 Mbps.
What does isolation mode do?
It separates client traffic within ports 1-4 and 5-8 for security and performance, set with a one-click toggle.
Can I use fiber for the uplink?
Yes. The 1000 Mbps combo port accepts either an SFP module or an RJ45 cable, one at a time.
Does this switch need to be configured?
No. It is unmanaged and works out of the box. There is no web interface or VLAN support.