Omada 48-Port Gigabit Stackable Lite L3 Managed Switch, 4 SFP+ Slots, Fanless
SKU TPL-SG5452X Model SG5452X
- 48 Gigabit RJ45 ports with 176 Gbps switching capacity per unit
- 4 SFP+ slots at 1/10G for uplinks, any of which can carry a stacking link
- Fanless build with 34.3 W maximum power draw and no PoE output
- Stack up to 4 units; static routing, RIP, OSPF, VRRP and DHCP server built in
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports48 x Gigabit, 4 x SFP+
- ConnectivityL3 managed, stackable
- Power34.3 W max, fanless
- Mount19-inch rack
- Size17.3 x 8.7 x 1.7 in
The Omada SG5452X is a 48-port Gigabit stackable Lite L3 managed switch with four 1/10G SFP+ slots, built to aggregate a large closet of cameras, APs and workstations. It runs fanless, so it stays quiet in an office closet, and it is managed in the same Omada site as the gateway and APs.
Built for dense wiring closets
All 48 RJ45 ports are Gigabit, with 176 Gbps of switching capacity per unit. Static routing, RIP, OSPF, VRRP and a DHCP server handle routing at the edge, and up to four units stack over the SFP+ slots. It has no PoE output, so pair it with injectors or a PoE switch where powered devices connect.
Key features
- 48 Gigabit RJ45 ports: 176 Gbps of switching capacity per unit
- Four 1/10G SFP+ slots: fiber uplinks or stacking links
- Fanless: silent operation with 34.3 W maximum power draw
- Stacks up to four units: up to 40 Gbps of stacking bandwidth using up to two stacking ports
- Lite L3 routing: static routes, RIP, OSPF, VRRP and DHCP server and relay
- Zero-touch provisioning: and batch firmware upgrades through the Omada Cloud-Based Controller
System requirements
Centralized management needs an Omada Cloud-Based Controller (built-in 5.15.22 or later), Hardware Controller or Software Controller (built-in 5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its web interface, CLI and SNMP. The SFP+ slots need separate modules.
Specifications
| SKU | TPL-SG5452X |
|---|---|
| Brand | TP-Link |
| Form factor | 48-port Gigabit Lite L3 managed switch with 4 SFP+ slots, rack mount |
| Communication | Ethernet / IP |
| Power input | 100-240V AC, 50/60 Hz |
| Power consumption | 34.3 W max at 110V (34.1 W at 220V) |
| Management | L3 Managed |
| Port speed | Gigabit |
| Port speed | 10G |
| Works with | Omada |
| Ethernet ports | 48 x Gigabit RJ45 |
| SFP slots | 4 x 1/10G SFP+ |
| Console ports | 1 x RJ45, 1 x USB Type-C |
| Stacking | Up to 4 units, up to 40 Gbps (max 2 stacking ports) |
| Switching capacity | 176 Gbps per unit |
| Packet forwarding rate | 130.94 Mpps |
| MAC address table | 16K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLANs, MAC, protocol, voice, private and multicast VLAN, GVRP, QinQ (256 entries) |
| L3 features | Static routing (512 IPv4, 128 IPv6), RIP v1/v2, OSPF v2/v3, VRRP v2/v3, DHCP server (64 pools) and relay, proxy ARP, ERPS, link aggregation, STP |
| Security | 802.1X with RADIUS, AAA with TACACS+, DHCP snooping, ARP inspection, IP source guard, port security, storm control, DoS defend, HTTPS and SSHv2 management |
| Controller management | Omada Cloud-Based Controller (built-in 5.15.22 or later); Hardware and Software Controller (built-in 5.15.20 or later); Omada app |
| Communication notes | Web GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, sFlow, IPv6, dual image and dual configuration |
| Cooling | Fanless |
| Mounting | 19-inch rack (mounting brackets included) |
| Dimensions | 17.3 x 8.7 x 1.7 in (440 x 220 x 44 mm) |
| Operating temp | 23°F to 113°F (-5°C to 45°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Package contents | SG5452X, power cord, console cable, mounting brackets, screws, rubber feet, quick installation guide |
