Omada Access Plus 48-Port Gigabit L2+ Managed PoE+ Switch with 500 W PoE Budget, 4 10G SFP+ Slots with 3-Year Omada Device Support
SKU TPL-SG3452XP-S3 Model SG3452XP-S3
- 48 Gigabit PoE+ ports at up to 30 W each from a 500 W shared budget
- Four 10G SFP+ slots for uplinks to the core
- Fast PoE and Perpetual PoE keep cameras and APs powered through a switch reboot
- L2+ static routing, 4K VLANs, ACLs and 802.1X, managed in Omada or standalone
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports48 x Gigabit PoE+, 4 x SFP+
- PoE500 W, 30 W per port
- ConnectivityL2+ managed, Omada
- Mount19-inch rack
- Size17.3 x 13.0 x 1.7 in
This SKU is the SG3452XP bundled with 3 years of Omada Device Support from TP-Link. The hardware is identical to the standalone SG3452XP.
The Omada SG3452XP is a 48-port Gigabit L2+ managed PoE+ switch with a 500 W budget and four 10G SFP+ slots, sized for an access closet full of cameras, access points and phones. It joins the same Omada site as the gateway and APs.
Built for camera and wireless closets
Every RJ45 port delivers 802.3af/at PoE+ at up to 30 W, with Perpetual PoE keeping devices powered through a switch reboot and Fast PoE bringing them up early at cold start. Static routing, 802.1Q VLANs, QinQ, ACLs, 802.1X and IGMP snooping cover segmented camera, voice and guest networks. Manage it from an Omada controller or standalone.
Key features
- 500 W across 48 PoE+ ports: up to 30 W per port for cameras, APs and phones
- Perpetual and Fast PoE: devices stay powered through a switch reboot
- Four 10G SFP+ slots: uplinks to the core or between buildings
- L2+ features: static routing, DHCP server, VLANs, QinQ, ACLs and ERPS
- Zero-touch provisioning: through the Omada Cloud-Based Controller
- Rackmount case: rackmount kit and rubber feet included
System requirements
Centralized management needs an Omada Cloud-Based, Hardware or Software Controller; zero-touch provisioning needs the cloud-based controller. Without a controller the switch runs standalone from its web interface and CLI. Powered devices must be 802.3af or 802.3at compliant.
Specifications
| SKU | TPL-SG3452XP-S3 |
|---|---|
| Brand | TP-Link |
| Form factor | 48-port Gigabit L2+ managed PoE+ switch with 4 SFP+ slots, rackmount |
| Support plan | 3-year Omada Device Support (included) |
| Communication | Ethernet / IP |
| Power input | 100-240V AC, 50/60 Hz |
| Power consumption | 648.2 W max at 110V/60 Hz with 500 W of PoE load |
| Management | L2+ Managed |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| Port speed | Gigabit |
| Port speed | 10G |
| Works with | Omada |
| Ethernet ports | 48 x 10/100/1000 Mbps RJ45 PoE+ |
| SFP slots | 4 x 10G SFP+ |
| Console ports | 1 x RJ45, 1 x Micro-USB |
| PoE budget | 500 W total, up to 30 W per port |
| PoE features | Fast PoE, Perpetual PoE |
| Switching capacity | 176 Gbps |
| Packet forwarding rate | 130.9 Mpps |
| MAC address table | 16K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLANs, MAC, protocol, private and voice VLAN, QinQ, GVRP |
| L2+ features | 48 IPv4/IPv6 static routes, DHCP server and relay, link aggregation, STP, ERPS, loopback detection, port mirroring |
| Security | 802.1X with RADIUS and TACACS+ AAA, ACLs, DHCP snooping, ARP inspection, port security, storm control, DoS defend, HTTPS and SSH management |
| Controller management | Omada Cloud-Based, Hardware and Software Controllers; Omada app |
| Communication notes | Web GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, IPv6, dual image and dual configuration |
| Cooling | 3 fans |
| Surge protection | 6 kV |
| Mounting | 19-inch rack (rackmount kit and rubber feet included) |
| Dimensions | 17.3 x 13.0 x 1.7 in (440 x 330 x 44 mm) |
| Operating temp | 23°F to 113°F (-5°C to 45°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | CE, FCC |
| Package contents | SG3452XP, power cord, RJ45 console cable, quick installation guide, rackmount kit, rubber feet, screws |
