Omada 8-Port 10G SFP+ L2+ Managed Aggregation Switch, Fanless, Rack Mount with 5-Year Omada Device Support
SKU TPL-SX3008F-S5 Model SX3008F-S5
- 8 SFP+ slots at 10G with 160 Gbps of switching capacity for uplinks
- Fanless build with 15.46 W maximum power draw for a quiet closet
- L2+ static routing, DHCP server, VLANs, ACLs and ERPS ring recovery
- Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports8 x 10G SFP+
- ConnectivityL2+ managed, cloud or standalone
- Power15.46 W max, fanless
- Mount19-inch rack
- Size17.3 x 7.1 x 1.7 in
This SKU is the SX3008F bundled with 5 years of Omada Device Support from TP-Link. The hardware is identical to the standalone SX3008F.
The Omada SX3008F is an 8-port 10G SFP+ L2+ managed aggregation switch with 160 Gbps of switching capacity, sized for tying access switches together over fiber or DAC. It is fanless, draws 15.46 W at most, and is managed in the same Omada site as the gateway and APs.
Built for quiet 10G aggregation
All eight slots are 10G SFP+, so a stack of PoE and access switches can uplink at full speed. Static routing, a DHCP server, VLANs, ACLs and ERPS ring recovery cover the Layer 2 and light Layer 3 work an aggregation layer needs. The case is rack mountable and a physical security lock slot is built in.
Key features
- Eight 10G SFP+ slots: 160 Gbps of switching capacity and 119.04 Mpps forwarding
- Fanless: silent operation with 15.46 W maximum power draw
- L2+ routing: 48 IPv4/IPv6 static routes and a DHCP server and relay
- ERPS ring recovery: rapid protection and recovery in a ring topology
- Zero-touch provisioning: and batch firmware upgrades through the Omada Cloud-Based Controller
- Rack mount: rackmount kit included, with a physical security lock
System requirements
Centralized management needs an Omada Cloud-Based Controller (built-in 5.15.22 or later), Hardware Controller or Software Controller (built-in 5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its web interface, CLI and SNMP. The SFP+ slots need separate modules or DACs. Only one 10G RJ45 SFP+ module (SM5310-T) can be inserted at a time.
Specifications
| SKU | TPL-SX3008F-S5 |
|---|---|
| Brand | TP-Link |
| Form factor | 8-port 10G SFP+ L2+ managed aggregation switch, rack mount |
| Support plan | 5-year Omada Device Support (included) |
| Communication | Ethernet / IP |
| Power input | 100-240V AC, 50/60 Hz |
| Power consumption | 15.46 W max at 220V |
| Management | L2+ Managed |
| Port speed | 10G |
| Works with | Omada |
| SFP slots | 8 x 10G SFP+ |
| Console ports | 1 x RJ45, 1 x Micro-USB |
| Switching capacity | 160 Gbps |
| Packet forwarding rate | 119.04 Mpps |
| MAC address table | 32K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLANs, MAC, protocol, private and voice VLAN, GVRP, QinQ (port-based and selective) |
| L2+ features | 48 IPv4/IPv6 static routes, DHCP server and relay, link aggregation, STP, ERPS, loopback detection, IGMP and MLD snooping |
| Security | 802.1X with RADIUS, AAA with TACACS+, ACLs (MAC, IP, time-based), DHCP snooping, ARP inspection, port security, storm control, DoS defend, HTTPS and SSH management |
| Controller management | Omada Cloud-Based Controller (built-in 5.15.22 or later); Hardware and Software Controller (built-in 5.15.20 or later); Omada app |
| Communication notes | Web GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, sFlow, IPv6, dual image and dual configuration |
| Cooling | Fanless |
| Mounting | 19-inch rack (rackmount kit included), physical security lock |
| Dimensions | 17.3 x 7.1 x 1.7 in (440 x 180 x 44 mm) |
| Operating temp | 32°F to 122°F (0°C to 50°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | CE, FCC |
| Package contents | SX3008F, power cord, rackmount kit, rubber feet, screws, installation guide |
