Omada Fast Ethernet PoE+ Extender, 802.3af/at, 1 PoE In and 1 PoE Out, 20 W Max
SKU TPL-POE10E Model POE10E
- In-line PoE+ extender with one PoE in and one PoE out port, 10/100 Mbps
- Supplies up to 20 W to 802.3af/at devices such as IP cameras on the far end
- Extends a PoE run to 200 m, or 350 m with a 250 m leg in 10 Mbps mode
- Powered by the PoE input, plug and play with no configuration at all
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports2 x 10/100 Mbps RJ45
- PoE802.3af/at, 20 W max
- Range200 m, 350 m at 10 Mbps
- Size2.8 x 1.02 x 0.63 in
The POE10E is a Fast Ethernet PoE+ extender that picks up where a 100 m PoE run ends, so a camera or access point can sit farther out without adding a switch or a power drop.
Built for long camera runs
PoE comes in on one RJ45 port, and data plus up to 20 W goes out the other, enough for most IP cameras. TP-Link rates the chain at 200 m total (100 m + 100 m), or 350 m when one leg runs to 250 m in 10 Mbps mode. Drop it in line, nothing to configure.
Key features
- Up to 20 W PoE output: 802.3af/at compliant for IP cameras and similar loads
- 200 m reach, 350 m in 10 Mbps mode: measured from the PoE source
- Plug and play: no configuration, no extra power supply
- Compact in-line body: 2.8 x 1.02 x 0.63 in, easy to hide in a box or enclosure
System requirements
An 802.3af/at PoE source (switch or injector) feeding the PoE IN port, and an 802.3af/at powered device on the PoE OUT port. Use UTP/STP Cat 5e or better.
Specifications
| SKU | TPL-POE10E |
|---|---|
| Brand | TP-Link |
| Form factor | Fast Ethernet in-line PoE+ extender |
| Communication | Ethernet / IP |
| Power input | PoE in (802.3af/at) on the PoE IN port |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| Port speed | Fast Ethernet |
| Ethernet ports | 2 x 10/100 Mbps auto-negotiation RJ45 (1 PoE IN, 1 PoE OUT) |
| PoE output | 20 W max |
| PoE features | Extends PoE to 200 m (100 m + 100 m), or 350 m with a 250 m leg in 10 Mbps mode |
| Communication notes | IEEE 802.3i, 802.3u; UTP/STP Cat 5e or above |
| Mounting | Desktop |
| Dimensions | 2.8 x 1.02 x 0.63 in (71 x 26 x 16 mm) |
| Operating temp | 32°F to 113°F (0°C to 45°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | POE10E, installation guide |
Documents and resources
FAQs
How far can the POE10E extend a PoE run?
TP-Link rates 200 m total (100 m + 100 m), or 350 m with a 250 m leg in 10 Mbps mode, measured from the PoE source.
How much power can it deliver?
Up to 20 W on the PoE OUT port, which TP-Link says covers most IP cameras.
Does it need its own power supply?
No. It is powered by the 802.3af/at PoE on the PoE IN port.
What speed does it run?
10/100 Mbps auto-negotiation. Use 10 Mbps mode on the long leg for the 250 m reach.
