TP-Link

Omada Gigabit Outdoor PoE+ Extender, 802.3af/at, 30 W Max, IP68, 6 kV Surge Protection

SKU TPL-POE20E-Outdoor Model POE20E-Outdoor

  • Gigabit outdoor PoE+ extender supplying up to 30 W to 802.3af/at devices
  • IP68 enclosure, -40°F to 149°F operating range and 6 kV lightning protection
  • Adds 100 m at Gigabit speed, or up to 250 m per leg at lower speed
  • Waterproofing components and a ground wire are included in the box
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • Ports2 x Gigabit RJ45
  • PoE802.3af/at, 30 W max
  • Weather ratingIP68
  • Range200 m, up to 500 m at lower speed

The POE20E-Outdoor is a weatherproof Gigabit PoE+ extender that adds another 100 m to a PoE run, built to sit outside at the far end of a camera or access point cable.

Built for remote outdoor camera and AP runs

It takes PoE in on one RJ45 and passes data plus up to 30 W out the other to an 802.3af/at device. The enclosure is rated IP68, operates from -40°F to 149°F, and carries 6 kV lightning protection. TP-Link rates the chain at 200 m (100 m + 100 m), or 500 m (250 m + 250 m) at lower speed.

Key features

  • IP68 enclosure: dust and water proof, with waterproofing components and a ground wire included
  • Up to 30 W PoE output: 802.3af/at for IP cameras and access points
  • 200 m at Gigabit, up to 500 m with 250 m legs at lower speed
  • -40°F to 149°F operating range with 6 kV lightning protection
  • Plug and play: no configuration

System requirements

An 802.3af/at PoE source feeding one port and an 802.3af/at powered device on the other. Use Cat 5e or better for Gigabit runs. At 160 to 170 m on Cat5e, set the connected device to 10 Mbps full duplex or enable Extend Mode on the PSE.

Specifications

SKUTPL-POE20E-Outdoor
BrandTP-Link
Form factorGigabit outdoor in-line PoE+ extender, IP68
CommunicationEthernet / IP
Power inputPoE in (802.3af/at)
PoE802.3af PoE
PoE802.3at PoE+
Port speedGigabit
Ethernet ports2 x 10/100/1000 Mbps auto-negotiation RJ45 (PoE in, PoE out)
PoE output30 W max
PoE featuresExtends PoE to 200 m (100 m + 100 m), or 500 m (250 m + 250 m) at lower speed
MAC address table2K
Jumbo frame9216 bytes
Communication notesIEEE 802.3i, 802.3u, 802.3ab, 802.3af, 802.3at; 10BASE-T to 250 m, 100BASE-TX and 1000BASE-T to 100 m
Weather ratingIP68
Surge protection6 kV lightning; ESD air 15 kV, contact 10 kV
Dimensions8.73 x 1.22 x 1.24 in (221.7 x 31 x 31.5 mm) with waterproofing components; 4.8 x 1.22 x 1.24 in (120.8 x 31 x 31.5 mm) without
Operating temp-40°F to 149°F (-40°C to 65°C)
Operating humidity15 to 90% RH, non-condensing
ComplianceCE, FCC, BSMI, KC
Package contentsPOE20E-Outdoor, waterproofing components, ground wire, installation guide

Documents and resources

FAQs

How far can the POE20E-Outdoor extend a run?
200 m total (100 m + 100 m) at Gigabit, or up to 500 m (250 m + 250 m) at lower speed. Results vary with cable quality.
How much power can it pass?
Up to 30 W of 802.3af/at PoE to the powered device.
Is it weatherproof?
Yes. The enclosure is IP68, with waterproofing components and a ground wire in the box.
What if the link drops at 160 to 170 m on Cat5e?
TP-Link says to set the connected device to 10 Mbps full duplex or enable Extend Mode on the PSE, or change the cable length.