AJAX

CombiProtect Jeweller Combined Motion & Glass Break Detector, Black

SKU AJ-42795

  • Fast shipping from four branches
  • 30-day returns on unopened products

A PIR and a glass break detector in the same enclosure, on one system point. For a room with glazing that needs both, this is one device, one battery, one enrollment and one point of the hub's capacity instead of two.

Built for the installer

Glass break detection uses an electret microphone covering 1 to 30 feet across 180 degrees, with DualTone verification. DualTone requires both the low-frequency thud of the impact and the high-frequency shatter before it alarms, which is why a dropped glass or a slammed door does not trigger it. Minimum glass size is 11 by 11 inches.

The motion side matches MotionProtect: 39 feet at 88.5 degrees with pet immunity to 44 pounds. Alarm.com publishes measured coverage per sensitivity level, from 44.9 by 52.4 feet on high down to 24.8 by 15.7 feet on low, which is unusually specific and worth using when planning a room.

Key features

  • Two detectors on one system point, saving hub capacity, battery count and enrollment time
  • DualTone glass break verification requires both impact and shatter frequencies before alarming
  • Measured coverage published per sensitivity level, so a room can be planned rather than guessed
  • Pet immunity to 44 lb and 1.6 ft on the motion side
  • Glass break to 30 ft across 180 degrees from a single position

System requirements

Requires an Ajax hub or range extender. Indoor use only. Recommended mounting height is 7.9 ft. Minimum detectable glass size is 11 x 11 in.

Specifications

SKUAJ-42795
BrandAJAX
Radio communication rangeUp to 3,900 ft in open space, between the device and a hub or range extender
Sensitive elementsPIR sensor and electret microphone
Motion detection distanceUp to 39 ft when installed at 7.9 ft
Motion detection angleHorizontal 88.5 degrees
Measured motion coverageHigh: 44.9 x 52.4 ft. Normal: 28.2 x 24.9 ft. Low: 24.8 x 15.7 ft
Glass break detection distanceFrom 1 to 30 ft
Glass break detection angleHorizontal 180 degrees
Minimum glass size11 x 11 in
Glass break verificationDualTone, two-factor low and high frequency analysis
Sensitivity3 levels for each sensor, adjustable in the Ajax app
Pet immunityUp to 44 lb weight and up to 1.6 ft height
Sabotage protectionTamper alarm on enclosure opening or removal from the mounting panel
Use environmentIndoor use only
ColourBlack
Region9NA, North America model
Radio protocolJeweller, two-way encrypted wireless
Frequency band (North America)905.0-926.5 MHz, certified to UL/ULC standards
Radio modulationGFSK with frequency hopping
EncryptionBlock encryption with a dynamic key
Communication loss detectionAfter 36 seconds
Anti-spoofingDevice authentication
Warranty24 months
FrequencyJeweller

Documents and resources

FAQs

Does this count as one device or two on the hub?
One. Both the motion and glass break sensors report through a single device slot, which saves hub capacity on a large system as well as a second battery to maintain.
What stops a dropped glass triggering the glass break sensor?
DualTone verification. The detector requires both the low-frequency impact and the high-frequency shatter before alarming, which a dropped glass or a slammed door does not produce.
What is the smallest pane it will detect?
11 by 11 inches. Smaller panes such as leaded lights or small decorative glazing may not produce a reliable signature.
Does this device need an Ajax hub?
Yes. All Jeweller devices report to an Ajax hub or a range extender. The device cannot operate standalone and does not connect to a third-party panel directly.
What does the 9NA region code mean?
It is the North America model, operating on the 905.0-926.5 MHz Jeweller band certified to UL/ULC standards. European models on 868 MHz are not interchangeable with it.
How quickly is a lost device detected?
Within 36 seconds. Jeweller polls each device continuously, so a jammed, removed or failed device is reported rather than quietly going offline.