A sensor with its own LTE connection, which means it monitors things nowhere near a security system. Gates, containers, outbuildings, pump houses, remote plant and unoccupied sites all become monitorable without a panel, a hub or a network at the location.
Built for the installer
That independence is the whole product. Normally, monitoring a gate half a mile from the building means either a long cable run or a wireless bridge and a repeater chain. This reports directly over Verizon LTE, so the install is mounting it and enrolling it.
It carries a magnetic reed switch for position, a loop input for any dry-contact device, and a relay output for control. The relay needs DC power for an always-on connection, so plan power if the output is being used. Full operating range runs from -40F to 140F, with optimal battery life between 32F and 140F.
Key features
- Own LTE connection, so no panel, hub or network is needed at the location
- Monitors remote assets that would otherwise need a long cable run or a repeater chain
- Reed switch plus loop input, covering position and any dry-contact device
- Relay output for control as well as monitoring
- Operates from -40F to 140F for genuinely exposed positions
System requirements
Requires Verizon LTE coverage at the sensor location and an Alarm.com account with a service package supporting Flex IO. DC power at 24V, 40 mA is required where the relay output is used.
