4-Position Spdt With Led In Metal Enclosure
Kidde Commercial

4-Position Spdt With Led In Metal Enclosure

SKU KD-MR104C

New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

The MR104C packs four independently switched SPDT relays into one dustproof metal enclosure, with a red LED per position so a tech can confirm which relay is energized without pulling a meter.

Built for the commercial fire installer

Each relay position accepts whichever control voltage the job calls for — 24 Vdc, 24 Vac, 115 Vac, or 230 Vac — by landing on the correct input terminals, so one enclosure covers mixed-voltage control jobs instead of stocking separate relays per voltage. Positions snap apart from the four-position master if a job only needs one or two relays, and track mounting hardware drops straight into standard equipment cabinets.

Key features

  • Four SPDT relay positions, each independently powered from 24 Vdc, 24 Vac, 115 Vac, or 230 Vac
  • Red LED per position confirms coil energization at a glance — no meter required
  • Dustproof metal enclosure with LED viewing port
  • Snap-apart design lets single, dual, or triple relay modules break off the 4-position master
  • UL recognized at 10 million mechanical operations; UL listed as control unit accessory
  • Track mounting hardware for standard equipment cabinets

Compatibility

General-purpose control and switching for fire alarm, HVAC, security, energy management, and lighting control systems.

Specifications

SKUKD-MR104C
BrandKidde Commercial
Form factor4-position SPDT relay bank, metal enclosure
Contact rating10A
Input voltage24 Vdc, 24 Vac, 115 Vac, or 230 Vac (per position)
IndicatorsRed LED per relay position
ListingsUL recognized (10M ops), UL listed control unit accessory

Documents and resources

FAQs

What voltages can energize each relay position?
Each of the four SPDT positions can be energized independently from 24 Vdc, 24 Vac, 115 Vac, or 230 Vac by wiring to the matching input terminals.
Can I use fewer than four relays from this unit?
Yes, single, dual, or triple relay modules snap apart from the standard four-position master.
How do I tell which relay is energized?
Each position has its own red LED, visible through the enclosure's viewing port, so no metering is required to check status.
What's the contact rating?
10 Amp SPDT contacts, UL recognized for 10 million mechanical operations.
All Kidde Commercial