The EGCVWF-CVR is a quick-swap replacement cover for Kidde Genesis LED EGC Series ceiling-mount strobe appliances. White housing with red FIRE marking. Snap it on to change the appearance or marking of an installed EGC ceiling strobe without pulling the device off the mounting plate or disrupting any wiring.
Simple field swap
Genesis LED EGC Series covers pop off with a screwdriver and snap back into place on the room-side wiring plate. No need to disconnect wiring, access the back box, or remove the device from the ceiling. Swap from FIRE to ALERT marking, change from red to white housing, or replace a damaged cover in minutes. The same cover removal also gives access to the strobe's light output settings and diagnostics test port.
Key details
- Quick-swap design: remove and replace the cover without taking the strobe off its mounting plate
- White housing with FIRE marking in red lettering
- Compatible with Genesis LED EGC Series ceiling-mount strobe appliances
- Access light output settings and diagnostics test port by removing the cover
Other EGC strobe cover options
- EGCVRF-CVR: Red housing, FIRE marking
- EGCVWA-CVR: White housing, ALERT marking
Brand:
Kidde
Form factor:
Replacement ceiling strobe cover
Color:
White
Marking:
FIRE (red lettering)
Compatibility:
Kidde Genesis LED EGC Series ceiling-mount strobe appliances
Material:
Polycarbonate
What Genesis appliances does this cover fit?
The EGCVWF-CVR fits Kidde Genesis LED EGC Series ceiling-mount strobe appliances. It is not designed for wall-mount (EG4 Series) devices or horn-strobe (EGCAV) models, which use different cover configurations.
Can I change the cover without removing the strobe from the ceiling?
Yes. The cover removes with a screwdriver and snaps back into place on the room-side wiring plate. No need to disconnect wiring or access the back box.
What other cover options are available for EGC ceiling strobes?
Three strobe cover options exist: EGCVWF-CVR (White, FIRE), EGCVRF-CVR (Red, FIRE), and EGCVWA-CVR (White, ALERT). Each is a drop-in swap on the same EGC strobe base.
Does the cover affect strobe output or UL listing?
The cover is a factory-original Kidde part designed for the Genesis LED EGC Series. Swapping between official Kidde covers does not affect the UL/ULC listing or candela output of the strobe appliance.
Spec Sheet
