The EGCSVRF-CVR is a replacement cover for Kidde Genesis LED EGCS Series ceiling-mount speaker-strobes. Red housing with white "FIRE" markings - it snaps on and off with a flathead screwdriver, so you can swap markings or replace a damaged cover without pulling the device off the ceiling or touching the wiring behind it.
Built for field serviceability
Genesis EGCS covers are designed for quick-swap changes in the field. Need to switch from FIRE to ALERT, red to white, or replace a cover that took a hit during construction? Pop the old one off, snap the new one on. No tools beyond a flathead, no disruption to the NAC circuit, no re-wiring. The cover provides viewing windows so candela and wattage tap settings stay accessible from outside the device.
Key details
- Fits all EGCS Series ceiling speaker-strobes: EGCSVRF, EGCSVRN, EGCSVWF, EGCSVWN, EGCSVWA models
- Quick-swap design: change cover markings or color without removing the device from the ceiling
- Red housing (RAL 3013) with white "FIRE" lettering
- Settings remain accessible: candela output and wattage tap selection visible through the cover
Brand:
Kidde Commercial
Form factor:
Replacement cover for Genesis LED EGCS Series ceiling speaker-strobes
Color:
Red (RAL 3013)
Marking:
FIRE (white lettering)
Compatibility:
Genesis LED EGCS Series ceiling speaker-strobes: EGCSVRF, EGCSVRN, EGCSVWF, EGCSVWN, EGCSVWA
Diameter:
6.8 in (17.27 cm) - matches full device profile
Does this cover fit Genesis EGC Series ceiling horns or horn-strobes?
No. The EGCSVRF-CVR fits EGCS Series (speaker and speaker-strobe) devices only. EGC Series horn and horn-strobe devices use different covers with different part numbers (EGCAVRF-CVR for horn-strobes, EGCVRF-CVR for strobes).
Can I change the FIRE marking to ALERT or no marking?
Yes. Order the corresponding EGCS cover variant: EGCSVRN-CVR (red, no marking), EGCSVWA-CVR (white, ALERT), EGCSVWF-CVR (white, FIRE), or EGCSVWN-CVR (white, no marking).
Do I need to remove the device from the ceiling to swap the cover?
No. The cover snaps off with a flathead screwdriver and the new one snaps on. The device stays mounted and wired - no disruption to the NAC circuit.
Are the candela and wattage settings still accessible after the cover swap?
Yes. The cover has viewing windows for both the candela output selector and the wattage tap setting, so adjustments can be made without removing the cover.
Spec Sheet
