• SS&Si
  • Fire
  • Kidde | Ceiling/Wall Horn/Strobe 135-185cd Low Frequency Red FIRE Marking. Room Side Wiring Plate included. | EGCLFVHRF
Ceiling/Wall Horn/Strobe 135-185cd Low Frequency Red FIRE Marking. Room Side Wiring Plate included.
Kidde Commercial

Ceiling/Wall Horn/Strobe 135-185cd Low Frequency Red FIRE Marking. Room Side Wiring Plate included.

SKU KD-EGCLFVHRF

New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

The EGCLFVHRF is a ceiling or wall mount horn-strobe built around Genesis LED strobe technology, drawing less current per candela setting than legacy xenon strobes so more devices fit on a single NAC circuit with smaller wire and fewer booster power supplies. The included room-side wiring plate lets an installer pre-wire the box and verify continuity with the built-in diagnostics check bar before the appliance ever snaps into place.

Built for the commercial fire installer

Field-selectable candela settings and a slide-switch tone selector (temporal or coded, high or low dB) mean one stocked part covers a range of NAC circuit designs, with the setting visible through a window after the cover closes. Genesis LED strobes are backward compatible with legacy xenon strobes on the same circuit, so retrofits don't require replacing everything at once. Red housing with FIRE marking suits standard fire alarm applications.

Key features

  • Low current draw: current stays the same across candela settings, simplifying circuit design and future changes
  • Field-selectable candela and sound output, changeable without removing the device from the wiring plate
  • Room-side wiring plate included: pre-wire and check continuity before the appliance is installed
  • Backward compatible with legacy xenon strobes on the same NAC circuit
  • Under-cover diagnostic test points for fast circuit verification while mounted

System requirements

Mounts to 1-gang, 2-gang, 4-inch octagon, or 4-inch square electrical boxes at least 1-1/2" deep. Compatible with Kidde CC-series signal modules, booster/auxiliary power supplies, and intelligent or conventional Kidde control panels.

Specifications

SKUKD-EGCLFVHRF
BrandKidde Commercial
Form factorCeiling/wall mount horn-strobe, red housing, FIRE marking
Strobe output135-185 cd, field-selectable, clear lens
Operating voltage16 to 33 VDC, 16 to 33 VFWR
Horn signal typeConstant or TC3 temporal, field selectable
Wire size12 to 18 AWG (0.75 to 2.50 mm²)
Mounting1-gang, 2-gang, 4-inch octagon, or 4-inch square box (1-1/2" deep minimum)
Wiring plateRoom-side wiring plate included for pre-wire and continuity checks
Compatible sync sourcesKidde CC-series signal modules, booster/auxiliary power supplies, intelligent and conventional control panels
Operating temp32°F to 122°F (0°C to 50°C)
Operating humidity0 to 93% noncondensing

Documents and resources

FAQs

Can the candela output be changed after installation?
Yes. Remove the cover and slide the candela switch to the desired setting; the appliance does not need to be removed from the wiring plate. The setting stays visible through a window after the cover closes.
Can this be mixed with older xenon strobes on the same circuit?
Yes. Genesis LED strobes are backward compatible and can be mixed with xenon-based strobes on the same circuit and field of view.
What electrical box does this mount to?
Any standard 1-gang, 2-gang, 4-inch octagon, or 4-inch square electrical box at least 1-1/2 inches deep.
Does this include the wiring plate?
Yes, the required room-side wiring plate ships with the device, so the box can be pre-wired and continuity-checked before the appliance snaps into place.
All Fire