• SS&Si
  • Fire
  • Kidde | Remote Annunciator compatible with EVOLVE-ML series LED With Common Controls Red English Kidde Commercial | K-RLED-CR-2
Remote Annunciator compatible with EVOLVE-ML series LED With Common Controls Red English Kidde Commercial
Kidde Commercial

Remote Annunciator compatible with EVOLVE-ML series LED With Common Controls Red English Kidde Commercial

SKU KD-K-RLED-CR-2

New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

The K-RLED-CR-2 is a red-housing 16-pair LED zone annunciator with common controls, giving a remote location per-zone alarm and trouble indication plus full common controls (Ack/Silence, Reset, Signal Silence, Drill, Lamp Test) without a text display to program or configure.

Built for the commercial fire installer

Where a job calls for zone-level status at a glance rather than scrolling text, the K-RLED-CR-2 covers 16 zones of alarm and trouble LEDs from one unit, in a red housing for clear fire alarm device identification. No programming required at the annunciator — set the network address with the on-board DIP switches and it inherits zone assignments from the panel. RS-485 wiring supports Class B, Redundant Class B, or Class A, and up to two expanders can be added per annunciator for 24 more zones each.

Key features

  • 16 pairs of zone LEDs for alarm and trouble indication at a glance
  • Red housing for clear fire alarm device identification
  • Common controls on-board: Ack/Silence, Reset, Signal Silence, Drill, Lamp Test
  • No programming required — set the network address via DIP switch, the unit inherits zone data from the panel
  • Class A or Class B RS-485 wiring, 9600 to 115200 baud
  • Expandable — up to two K-RLED24R-2 expanders add 24 more zone LEDs each

System compatibility

Compatible with EVOLVE-ML, FX64, FX1000, VS1, VS4, and VM panels. UL, ULC, FM listed.

Specifications

SKUKD-K-RLED-CR-2
BrandKidde Commercial
Form factor16-pair LED zone annunciator with common controls, red, English
Compatible panelsEVOLVE-ML, FX64, FX1000, VS1, VS4, VM panels
Operating voltage24 VDC, continuous
Standby / alarm current53 mA standby / 98 mA alarm
RS-485 communicationsClass B/DCLB, Redundant Class B/DCLB, or Class A/DCLA, 9600 to 115200 baud
Data wiring18 to 14 AWG (1.0 to 2.5 mm²) twisted pair, 6 twists/ft. min.; 4,000 ft. (1,219 m) max. run
Zone indication16 zone active LEDs, 16 zone trouble LEDs
Controls enabledAck/Silence, Reset, Signal Silence, Drill, Lamp Test
Dimensions5-5/8 x 8-1/2 x 1-1/2 in. (14.3 x 21.4 x 3.8 cm) (H x W x D)
MountingNorth American 4-inch square electrical box, or listed RA-series enclosure
Operating temp / humidity32 to 120°F (0 to 49°C), 0 to 93% noncondensing at 90°F (32°C)
Agency listingsUL, ULC, FM

Documents and resources

FAQs

What panels is the K-RLED-CR-2 compatible with?
EVOLVE-ML, FX64, FX1000, VS1, VS4, and VM control panels.
How is this different from the K-RLED-C-2?
Same 16-pair LED zone annunciator with common controls — the CR-2 has a red housing instead of white.
Does this annunciator need separate programming?
No. Set the network address and baud rate with the on-board DIP switches; the annunciator receives all other information from the panel automatically.
Can I add more zone coverage?
Yes. Up to two K-RLED24R-2 red LED expanders can be wired to this annunciator, each adding 24 pairs of zone LEDs.
All Fire