SS&Si
Video Surveillance
Luminys | R3 Starter Series NVR, 8MP 16 Ch 16-Port PoE, 2SATA, Analytics By Camera, 10TB | R32-16PA10

You save

Luminys | R3 Starter Series NVR, 8MP 16 Ch 16-Port PoE, 2SATA, Analytics By Camera, 10TB | R32-16PA10

No reviews yet Write a Review

SKU:: LM-R32-16PA10

Description
Specifications
FAQs
Documents

The Luminys R3 Starter Series NVR (R32-16PA10) brings 16-channel 4K recording and integrated camera-side analytics to commercial security deployments -- without the overhead of a full enterprise VMS. Sixteen built-in PoE ports mean no separate switch required, and the pre-installed 10TB drive gets you recording the same day it goes in the rack.

Built for the commercial installer

NDAA-compliant and ONVIF-compatible, the R32-16PA10 fits into mixed-vendor camera environments without reconfiguring your whole stack. The 1U chassis ships with rack mounting brackets. Two SATA bays support up to 20TB total storage, so you can expand capacity later without swapping the recorder. LumiCloud Lite is included out of the box; a paid LumiCloud subscription unlocks AI-based cloud event storage and 30-day rolling archive.

Key features

16-channel 4K recording: up to 8MP per channel at 160 Mbps recording bandwidth
16 built-in PoE ports (IEEE 802.3 af/at): powers cameras directly from the NVR -- no extra switch to buy or manage
Analytics by Camera: leverages edge analytics from Luminys cameras -- iMD on all 16 channels, VCA on 8, Face Detection and LPR on 4 each -- without taxing the NVR's processor
10TB HDD pre-installed: ready to record day one; second SATA bay open for expansion up to 20TB
HDMI 4K + VGA outputs: dual-monitor local viewing or integration with existing display infrastructure
LumiViewer client included: desktop and mobile app for live view, playback, and alarm management from anywhere
NDAA-compliant, ONVIF-compatible: meets government procurement requirements and works with third-party ONVIF cameras

System requirements

Cameras connect directly to the NVR's 16 PoE ports (up to 25.5W per port, 115W total PoE budget). A single GbE uplink connects the NVR to the customer's network for remote access via LumiViewer or LumiCloud. HDMI or VGA monitor required for local initial setup. Storage is pre-installed -- second SATA bay is open for a second drive up to 10TB.

Brand:

Luminys

Form factor:

1U rack mount

Video channels:

Max camera resolution:

8MP (4K)

Recording bandwidth:

160 Mbps incoming/recording; 60 Mbps outgoing

Decoding:

H.265, H.264, H.264H, H.264B, MJPEG; 2Ch @ 8MP/30fps or 8Ch @ 1080p/30fps

Video output:

HDMI (4K, 1920x1080, 1280x1024, 1280x720); VGA (1920x1080, 1280x1024, 1280x720)

PoE ports:

16x RJ-45, IEEE 802.3 af/at (10/100 Mbps); 115W total PoE budget; 25.5W max per port

Network uplink:

1x RJ-45 GbE (10/100/1000 Mbps)

Storage bays:

2x SATA; up to 10TB per drive (20TB max)

Included storage:

10TB HDD pre-installed

Analytics by Camera:

Intelligent Motion Detection (16ch), Video Content Analysis (8ch), Face Detection (4ch), License Plate Recognition (4ch)

Client software:

LumiViewer (desktop + mobile), LumiCloud

Interoperability:

ONVIF, RTSP

Audio:

1x RCA input, 1x RCA output

Alarm:

4 inputs, 2 outputs

USB:

1x USB 2.0 (front panel), 1x USB 2.0 (rear panel)

Protocols:

HTTP, HTTPS, TCP/IP, IPv4, IPv6, UPnP, SNMP, RTSP, UDP, SMTP, NTP, DHCP, DNS, DDNS

Power supply:

100-240V AC, 47-63 Hz, 3.5A

Power consumption:

Operating temp:

-10°C to 55°C (10°F to 131°F)

Operating humidity:

10% to 93%

Dimensions:

372 x 325.8 x 43.7 mm (14.7 x 12.8 x 1.7 in.)

Weight:

2.6 kg (5.8 lb) without HDD

Compliance:

NDAA

Certification:

FCC

Does this NVR require a separate PoE switch?

No. The R32-16PA10 has 16 built-in PoE ports (IEEE 802.3 af/at) powering cameras directly off the recorder. Total PoE budget is 115W with up to 25.5W per port -- enough for most commercial IP cameras without any additional switching hardware.

Is this NVR NDAA Section 889 compliant?

Yes. The R32-16PA10 is NDAA-compliant, making it appropriate for government and federally-funded projects.

What cameras work with this NVR?

Any ONVIF-compatible IP camera connects via Plug-and-Play. Analytics by Camera (iMD, VCA, Face Detection, LPR) requires Luminys cameras with edge analytics -- processing happens at the camera, not the NVR.

How much total storage does this NVR support?

The R32-16PA10 ships with a 10TB HDD installed. The second SATA bay accepts a second drive up to 10TB, for a maximum of 20TB total on-device storage.

What is LumiCloud Lite and does it require a subscription?

LumiCloud Lite is included free and covers remote live viewing and alarm management. Cloud video recording requires a paid LumiCloud HD Video Unity Channel license (LCL-HDV-U, annual per camera).

How many channels support analytics simultaneously?

Intelligent Motion Detection runs on all 16 channels. VCA on 8 channels. Face Detection and LPR each on 4 channels. Analytics run at the camera edge -- no impact on NVR recording bandwidth.

What is included in the box?

R3 Starter Series NVR, power cable (USA 3-pin, 15A/120VAC), 2x rack mounting brackets, USB mouse, screws, anti-slip pads, 2x SATA data cables, 1x SATA power cable, CAT5E Ethernet cable, and quick start guide.

Spec Sheet

Download File