You save

Luminys | IK08 Vandal-Resistant Metal Keypad Access Reader with MIFARE Card & PIN | RD1PM

No reviews yet Write a Review
SKU:
LM-RD1PM

The Luminys RD1PM is an all-metal vandal-resistant keypad reader for high-impact environments like warehouses, industrial gates, and public entrances. IK08 zinc alloy chassis, MIFARE IC card + PIN unlock, RS-485 or Wiegand output.

Built to survive rough entries

The IK08 impact rating means the reader withstands the kind of abuse you find at loading docks, exterior industrial doors, and any entry where end users and equipment collide with the hardware. Zinc alloy construction and backlit keys keep it usable and legible in low light. MIFARE card or PIN password can each unlock, so cardholders and code-only users share one reader.

Key features

  • All-metal zinc alloy chassis with IK08 vandal resistance
  • Card or password unlock: MIFARE IC (13.56 MHz) + numeric PIN
  • Backlit keypad for low-light entries
  • RS-485 and Wiegand outputs for panel integration
  • Tamper alarm event supported
  • LED indicator + buzzer feedback
  • 86 case or surface mount
  • NDAA compliant, FCC/FCC ID, IC/IC ID
Brand:
Luminys
Form factor:
Vandal-resistant metal keypad reader
Verification methods:
Card, password/PIN
Card type:
MIFARE IC card, 13.56 MHz
Card read distance:
0.0 in to 1.2 in (0.0 cm to 3.0 cm)
Response time:
0.1 s
Max transmission power:
42 dBm at 10 m
Backlight:
Built-in
Interfaces:
1 x RS-485, 1 x Wiegand output
Alarm events:
Tamper
Power supply:
9-15 VDC, 100 mA
Power consumption:
Standby ≤0.9W, Working ≤1.0W
Operating temp:
14°F to 131°F (-10°C to 55°C)
Operating humidity:
0% to 95% RH, non-condensing
Protection rating:
IK08
Casing material:
Zinc alloy
Installation:
86 case mount or surface mount
Dimensions:
4.33" x 3.35" x 1.02" (110 x 85 x 26 mm)
Weight:
1.2 lb (0.6 kg) gross
Certifications:
NDAA, FCC/FCC ID, IC/IC ID
What is IK08 rated for?
IK08 is an impact-resistance rating. It means the housing withstands a 5-joule impact, appropriate for high-abuse environments like industrial gates, loading docks, and public entrances.
What credentials does the RD1PM accept?
MIFARE (IC) cards at 13.56 MHz plus a numeric PIN/password. Users can be enrolled with either or both.
Is the RD1PM waterproof?
The datasheet lists IK08 (impact resistance) but does not specify an IP ingress rating. Confirm mounting environment with the datasheet before exterior installation.
Does the keypad work in the dark?
Yes. The keys are backlit.
Is the RD1PM NDAA compliant?
Yes. NDAA compliant with FCC/FCC ID and IC/IC ID certifications.

Spec Sheet